Download Print this page

WEMPE WeTech WTC695 User Manual

Download this manual

USER MANUAL

WTC695

Thank you for purchasing a WeTech® product. This user manual contains important safety

and operating instructions for your Passiv charger. Before using your charger, read this manual

and all warning instructions with care in order to avoid possible danger.

This product is suitable for the charging of MOTOROLA NNTN8020 and NNTN8023

rechargeable batteries.

Advice:

Batteries can be charged with belt clip.

Made in Germany

Page 1 This product is suitable for the charging of MOTOROLA NNTN8020 and NNTN8023 rechargeable batteries. Advice: Batteries can be charged with belt clip. © WEMPE Elektronic GmbH, Revision date: 26.09.2019 Made in Germany...
Page 2 Safety instruc tions Installation and the first start of the system should only be carried out by qualified technicians. When installed in a vehicle, the installation specifications of the vehicle manufacturer apply. Fasten the unit only in the interior of the vehicle. The fastening material included in delivery is recommended for proper installation.
Page 3 Battery detected. Quick charging active. Battery capacity under LED front shaft green Battery detected. Quick charging active. Battery capacity under DC socket DC socket for power supply voltage in accordance with the technical data. Schematic drawing WTC695 © WEMPE Elektronic GmbH...
Page 4 The correct disposal of this product supports environmental protection and prevents possible damage to the environment and human health. Contact This product was manufactured in Germany by: WEMPE Elektronic GmbH phone: +49 6621 9240-0 Leinenweberstr. 6 fax:...