Page 1
Model 1380-02A rod end load cell Installation and Operating Manual For assistance with the operation of this product,contact: PCB Load & Torque, Inc. Toll-free: 866-684-7107 24-hour SensorLine™: 716-684-0001 Fax: 248-888-8266 E-mail: LTInfo@pcbloadtorque.com Web: www.pcbLoadTorque.com...
“Lifetime Warranty Plus” on all Platinum Stock Products number, which we use to reference any information you sold by PCB and through its limited warranties on all other have already provided and expedite the repair process. PCB Stock, Standard and Special products. Due to the...
Page 3
CAUTION Refers to hazards that could damage the instrument. NOTE Indicates tips, recommendations and important information. The notes simplify processes and contain additional information on particular operating steps. The following symbols may be found on the equipment described in this manual: This symbol on the unit indicates that high voltage may be present.
ROD END LOAD CELL OPERATION MANUAL 3.1 Dimensions 1.0 INTRODUCTION Rod end load cells manufactured by PCB Load & Torque, Inc. are designed for integration into tension/compression measurement applications such as process automation, quality assurance, and production monitoring. Standard 3/4”-16 and 1”-14 male/female threads facilitate ease of installation.
5.2 Output Polarity 6.0 CALIBRATION The following figure describes the output polarity. Every rod end load cell manufactured by PCB Load & Torque, Compression Load Tensile Load Inc. has been fully calibrated per ISO/IEC 17025 procedures,...
Page 9
= Shunt Resistor (K ohms) to minimum load. = Bridge Resistance (ohms) Output = Full Scale output of the load cell (mV/V) = Load to be simulated, % of Load Cell Capacity PCB Load & Torque, Inc. Toll-Free in USA 866-684-7107 716-684-0001 www.pcbloadtorque.com...
If an initial evaluation shows that a transducer requires repair, 9.1 Mechanical Trouble Shooting PCB will provide the customer with an estimate prior to taking any corrective action. A mechanical checklist includes: 10.1 RMA / Purchase Order...
Page 11
3/4 - 16 Male No Metric Equivalent Mounting Thread 3/4 - 16 Female No Metric Equivalent Cover Material Anodized Aluminum Anodized Aluminum PCB Load & Torque, Inc. Sensor Material Anodized Aluminum Anodized Aluminum 24350 Indoplex Circle Sensing Element Strain Gage Strain Gage Deflection at Full Scale Capacity 0.0006 in...
Page 12
PCB Load & Torque Inc. claims proprietary rights in REVISIONS the information disclosed hereon. Neither it nor any reproduction thereof will be disclosed to others without DESCRIPTION the written consent of PCB Load and Torque Inc. ADDED CHART FOR M1380 SERIES - 04.26.18, PTE 48167 .50 [12.7]...