Connecting Ide And Floppy Disk Cables And Drives - Lite-on Tech NA115 User Manual

NA115 Motherboard
Connecting IDE and Floppy Disk Cables
1. Connecting the floppy disk ribbon cable into the motherboard. The side of the cable with the red
stripe needs to be inserted into the Pin1 side of the floppy disk connector.
2. Connecting the IDE ribbon cable into the motherboard. The side of the cable with the red stripe
should be inserted into Pin1 side of the IDE connector.
Red Stripe
to Pin1
Red Stripe
to Pin1
7
Floppy Connector
IDE Connectors