Table of Contents
Advertisement
WARNING
CAUTION
© Copyright 2015 ABB. All rights reserved.
Safety
Hazards during operation and
maintenance
Risk of fire, explosion
Combustible or easily ignited operating and auxiliary materials can
burst into flame, or vapours from them can cause explosions.
Observe specifications in the safety data sheets of the operating and
auxiliary materials.
Observe local legislation.
Do not allow any exposed flame during cleaning work.
Perform cleaning outdoors or ensure for adequate aeration and
ventilation.
Risk of environmental damage
The escape of operating and auxiliary materials into the atmosphere or
contamination of the ground and water due to improper disposal can
lead to environmental damage.
Handle operating and auxiliary materials carefully.
Heed the instructions for use, safety data sheets and hazard notices
on the containers of the operating and auxiliary materials.
Wear appropriate protective clothing.
Avoid inhalation and contact with the skin.
Ensure that the work space is adequately ventilated.
Seal containers tightly immediately after use and put them away.
Collect used working and auxiliary materials safely, store them
separately in suitable containers and dispose of them properly and in
an environmentally compatible manner in accordance with statutory
regulations.
In the event of leaks or after spilling, immediately spread a suitable
binding agent and dispose of it properly and in an environmentally
compatible manner in accordance with statutory regulations.
Operation Manual / TPS44-F.. - TPS61-F..
2
2.7
Page 28
Advertisement
Table of Contents
