Lens - Samsung WDR-SV4 User Manual

How to Use the Camera
MAIN SETUP

1.LENS

Select the function using
the UP or DOWN button.
2.EXPOSURE
3.WHITE BAL
4.BACKLIGHT
5.SSNR
6.DAY/NIGHT
7.IMAGE ADJ
8.SPECIAL
9.EXIT
3. Set up a selected item by using the Left and Right buttons.
4. To finish the setting, select 'EXIT' and press the SET button.
Notes
• An item with the icon also has sub menus. To select a sub menu, select an
item with the icon and press the SET button.
• An item with the - - - icon is unavailable due to function settings.
LENS
Using this function, you can control screen brightness.
1. When the SETUP menu screen is displayed, select LENS by using the Up and
Down buttons so that the arrow indicates LENS .
2. Select the connected lens type by using the Left and Right buttons.
MAIN SETUP
1.LENS
2.EXPOSURE
3.WHITE BAL
24
COLOR CCD CAMERA
DC Change the status using
the LEFT or RIGHT button.
ATW
OFF
ON
AUTO
DC
ATW
User's Manual
DC/Video : Select Auto Iris Lens
• When DC is selected, you can control screen brightness. The range of
brightness control is between 1 and 70. Adjust the brightness appropriately
for optimal screen brightness.
Notes
• Some lenses may not work properly, depending on the setting of the
BRIGHTNESS LEVEL.
• When Using a Video-Type Auto Iris Lens
Adjust the ALC adjustment terminal on the lens appropriately. In general, set
it to AV (Average).
It may not work properly depending on the installed lens. Set the Level VR of
the lens to the optimal value.
Set AGC / SENS-UP to OFF and adjust the Lens VR to an appropriate
brightness.
Adjust the Lens VR, adjust the BRIGHTNESS, and then check if the screen
brightness changes properly. Otherwise, adjust the Lens VR again.
Manual : Select Manual Lens
25
COLOR CCD CAMERA User's Manual