Advertisement
LINSN LED TECHNOLOGY CO., LTD
Tel: +86-755-36513042, Fax: +86-755-36984024 Website:
Initial Startup
output： as below You can use the HDMI / DVI adapter cable attached to the sending card. or you can also connect
the Gigabit output port to the receiver card directly(Note: if the big screen is not displayed,pls select the
appropriate receiver card in the display settings of the software, see below, "how to choose to receive the
card?" ).
Then starting to see a picture
screen.
If the player can work with the network, you can use the computer directly to control large screen,it is
convenient. Youcan put
exchanger on the other side.
How to set the screen size?
Installation MC100 Setup.exe ,or download MC100at:
Run MC100 Program edit management software on the computer
screen settings."
,
initial password:168
named LED here and specify its size, as well as other settings
type of receiving card, you can enter SendCard page, set " Recv Card Model ".
After setting, it must be uploaded to the LED. One is through the Internet (prior to the player network cable
connected), one is through U disk.
Address:Building 3,Sanlian Industrial Park,Shiyan Town,Bao'an District,Shenzhen,China.
MC100 LED Player Instructions
After completion of the moment just started, you'll see a short blue
if connect the internet right,you will see the IP address
if not connect the internet ,it looks like this :NULL
network cable into the player's Ethernet port directly
www.linsnled.com
www.linsnled.com
Download Center
. Click "Main Menu -> View-> LED
.
very
the, then connect with the
Advertisement
Table of Contents
Summary of Contents for Linsn MC100
- Page 1 Installation MC100 Setup.exe ,or download MC100at: www.linsnled.com Download Center Run MC100 Program edit management software on the computer . Click "Main Menu -> View-> LED screen settings." initial password:168 named LED here and specify its size, as well as other settings type of receiving card, you can enter SendCard page, set "...
- Page 2 How to upload the program? How to switch the current program? First big screen need connect network cable (or wireless usb wifi), and then run the mc100, you can upload the new program. Menu -> Administration -> Monitoring LED screen -> Find, select the screen -> Upload program. If you want to switch the current program, you can click on the "play the selected program"...
- Page 3 LINSN LED TECHNOLOGY CO., LTD Tel: +86-755-36513042, Fax: +86-755-36984024 Website: www.linsnled.com Then, plug the U disk into the big screen, you will see the "reading U disk .." Word. Some of the large programs, will take some time to upload. Some smaller, flash on the message will ok How to connect the player with a network cable box? How to set a fixed IP? Sometimes, you need t a laptopconnect to the network cabledirectly to adjust the player box .
Need help?
Do you have a question about the MC100 and is the answer not in the manual?
Questions and answers