Diamond Tech DIAMOND MAX ELITE Operation Manual

Diamond Tech DIAMOND MAX ELITE Operation Manual

Two-in-one glass grinder

Advertisement

Quick Links

DIAMOND TECH
Innovations For Creativity
DIAMOND MAX
ELITE
TWO-IN-ONE GLASS GRINDER
OPERATIONS MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DIAMOND MAX ELITE and is the answer not in the manual?

Questions and answers

Summary of Contents for Diamond Tech DIAMOND MAX ELITE

  • Page 1 DIAMOND TECH Innovations For Creativity DIAMOND MAX ELITE ™ TWO-IN-ONE GLASS GRINDER OPERATIONS MANUAL...
  • Page 2 WARNING: This product contains small parts that may be a choking hazard to small children. KEEP OUT OF REACH OF CHILDREN. Contents Your Diamond Max Elite Grinder has been shipped partially assembled. Carefully remove grinder and parts ™ from the packaging.
  • Page 3 PAGE 3 - DIAMOND MAX ELITE INSTRUCTION MANUAL ™ Remove the disk retaining nut from the disk support collar which is FIG.2 Retaining Nut already installed on the base of the grinder shaft (FIG.2). 4. Using the hex wrench, loosen the screw holding the disk support collar on the shaft and remove the collar (FIG.3).
  • Page 4 DIAMOND MAX ELITE INSTRUCTION MANUAL - PAGE 4 ™ Deluxe Model Only FIG.7 The Diamond Max Deluxe comes with 3/4” and 1/4” Silver Bullet Bits for ™ grinding versatility. 1. To install the 3/4” grinder bit, remove 1” grinder bit. 2.
  • Page 5 Solution 3: If the bit or disk is still stuck, use a plumbers helper or vice grip to remove the bit. If further assistance is necessary, call Diamond Tech toll free at (800) 937-9593 for tech service or to obtain a Return...
  • Page 6 Any grinder no longer under warranty will be returned at the owner’s expense. Diamond Tech reserves the right to repair or replace faulty equipment at its discretion. The Diamond Max Grinder is warranted against defective materials or workmanship. If the Diamond Max Grinder suffers damage due to customer modifications and/or is used for any application other than that for which it was designed, this warranty is void.

Table of Contents