Deenkee DS100 Instruction Manual page 10

How To Use
III. How to charge:
1) When only one indicator light is blinking, please turn off the appliance, put it back to
the charging base, then make sure the plug of the charger has been inserted into the
socket. When charging, the indicate lights will become flashing green.
Note： How to use the wall bracket
1. Hang it on the wall with screws
2. Use 3M stickers to make the bracket glued to the wall, for storing the vacuum cleaner
(make sure the height is the same as the vacuum cleaner itself, totally hanging away
from floor is not acceptable)
2) It will have 3 green lights on after fully charged.
IV. How to Maintain the Filter:
1）Press the handle locker to
remove the battery from dust cup.
3）Take out the filter case, then
take out the filter.
Wall
Blinking
Charging port
2）Separate and remove the top cover
4
7
as showed below.
）
W a s h h t e f t l i r e c a
filter by water.
English
4-5
hours
s e a n d h t e