Table of Contents
Advertisement
2.5
CPU Installation
The OMNI-2155-CML utilizes a socket-type CPU configuration, allowing users to easily
change or upgrade CPUs within the same socket-type.
Before starting CPU installation, be sure the system is powered down (not in sleep
mode) and the power has been disconnected. Also, make sure the CPU is ready for
installation. It is best to perform installation on a flat surface, with the system removed
from its mounting.
Step 1: Remove the screws securing the heatsink in place, then set the heatsink aside.
Step 2: Place the CPU into the CPU socket. Then, place the thermal pad on the CPU.
Step 3: Replace the heatsink and secure with the screws you removed in Step 1.
Chapter 2 – Hardware Information
31
Advertisement
Table of Contents
