Camos CD-2004MT Instruction Manual

4ch hd driving video recorder

Hide thumbs

Table Of Contents

Quick Links

Download this manual

4CH HD

Driving Video Recorder

INSTRUCTION MANUAL

Thank you for purchasing this product.

For correct application and usage instructions, please read this instruction manual thoroughly.

ver. 1.2

PRINTED IN KOREA

* When using an SD card over 64GB, be sure to format the SD card using

PC viewer manager before use.

Table of Contents

Summary of Contents for Camos CD-2004MT

Page 1 4CH HD Driving Video Recorder INSTRUCTION MANUAL Thank you for purchasing this product. For correct application and usage instructions, please read this instruction manual thoroughly. * When using an SD card over 64GB, be sure to format the SD card using ver.
Page 2: Table Of Contents
CONTENTS ..........3 PRECAUTION BEFORE USE ................5 FEATURES ..............5 BOX CONTENTS ......6 NAME AND FUNCTION OF EACH PART ............... 7 INSTALLATION ................9 OPERATION ............15 PC VIEWER MANAGER ..............23 SPECIFICATION...
Page 3: Precaution Before Use
PRECAUTION BEFORE USE Do not install the product where it cannot be mounted securely, or is exposed to excess vibrations. - It may cause an accident or injury if the product comes loose from its mounting while driving. Avoid wiring the product to a voltage higher than the maximum specified. - Excess voltage may cause an electric shock and/or fire.
Page 4 A vehicle with metallic tinting on the front window could cause poor GPS signal reception. Do not interfere with any wiring when the product is installed in an area with other wiring. - It may cause a malfunction or fire from a ‘bundle’ of electric wiring. Use only the specified components.
Page 5: Features
FEATURES • HD / CVBS resolution • TVI / AHD / CVBS camera compatible • IP69K (waterproof/dustproof) / aluminium die-cast case • Output: HD VIDEO OUT x1 / CVBS VIDEO OUT x1 • H-264 • Automatic recording when power is on (in the case of an external impact or if an accident occurs while driving) •...
Page 6: Name And Function Of Each Part
NAME AND FUNCTION OF EACH PART 4CH Digital DVR 1. LED lights 2. Forced power switch 3. SD card slot 4. Memory key lock Cable Connection Camera(Optional) CAM1 CAM2 Insulation Tape CAM3 MDM-201A CAM4 RED (DC 12-24V) BLACK (GROUND) MIC / GPS can be used with cable connection MDM-202A Microphone (optional) Emergency record button...
Page 7: Installation
INSTALLATION Please read the following points prior to installation. - Turn off the product before installation, and ensure the vehicle key is not inserted and turned on at any time during the installation. - Only use the cables supplied. Do not use any other unverified cable. - Any vehicle with dark or metallic tinting may have a negative influence on the GPS signal strength.
Page 8 LED lights on the DVR Wi-Fi Connection Status Camera Connection Status(1-4) GPS Connection Status MIC Connection Status * Only the LEDs with a good connection to the external device are indicated. All camera LEDs will flash when an event occurs. Buzzer &...
Page 9: Operation
OPERATION Please note the following before operating the product. - Do not touch the device while driving. - Connect the GPS, VIDEO OUT and MIC before turning on the vehicle. - After powering on the device, it may reboot. This is not a device fault. - Recording is only possible when the SD card is inserted.
Page 10 Recording Status and LED Confirmation Booting 1. All LED lights turn on for 12 seconds after successfully booting. Then, CAM 1 to 4 lights turn on for four seconds. CAM 1 to 4 lights will then flash every second for five seconds, after which drive recording will start. * Please check the power or SD card connection status if the device does not boot within 30 seconds.
Page 11 * Please make sure the power stays on while updating. Please carefully read the below information if using an SD card over 64GB. - The CAMOS DVR supports automatic formatting (FAT32) when a memory card larger than 64GB is first used.
Page 12 RECORDING MODE & TIME Continuous Recording Section Event Recording Section 1. Continuous Recording (NORMAL) *Normal recording videos are saved in the NORMAL folder. Continuous Recording : DVR will record in two-minute files. ㆍ ㆍ ㆍ 2min 2min 2min 2min 2min 2.
Page 13 3. Forced Recording (MANUAL) *Forced recording videos are saved in the MANUAL folder. 1) Extension Emergency Button (optional) Install the emergency recording button within easy reach of the driver to start a forced recording when necessary. * This button is connected to the remote control receiver input. Continuous Continuous E button on the remote control or...
Page 14 SCREEN FEATURES / SCREEN LAYOUT Displays the current date and time. 1. Current Time Displays the GPS connection status (connected = O, not connected = X). 2. GPS Connection Displays the recording status (NORMAL / GSENSOR / MANUAL). 3. Recording Status Displays the speed when the GPS is connected (Km/h, MPH).
Page 15: Pc Viewer Manager
Cancel “Viewer” folder in the SD card. * Please remove the “Viewer” folder after the installation of PC Viewer Manager. * After formatting the SD card, you can download the PC Viewer Manager setup file from the Camos website: www.camos.co.kr.
Page 16 2. Click [Next] on the setup wizard. 4. Click [Next] at Confirm Installation step. 5. Click [Close] at Installation Complete step. ◀ Installation Progress Screen ※ Viewer’s Software is subject to change without notice. The latest viewer version is available for download from CAMOS website.
Page 17 User Interface Instructions 1. Play screen Displays quad recorded video. 2. 3G sensor Displays 3G sensor information. 3. Volume control Adjusts sound (mute/volume +,-) 4. Playback control Previous file/Backward/Play(pause)/Forward/Next file 5. Play speed control Adjusts playback speed (x1/4 ~ x4) 6.
Page 18 Recorded Video Playback Instructions Disk Read 1. ① Click on the “Folder” button to display the Disk Read screen. 2. ② On the Disk Read screen, select the connected drive and press the OK button to display a list of files. 3.
Page 19 Mode Change 1. Four images are displayed after running the viewer and selecting a file (refer to image EX1) 2. The selected part of the screen is zoomed-in when you double click it during playback. Double click it again to return to the previous screen (refer to image EX2).
Page 20 Additional Functions Click the ① button to show the accident report. Click the Add Memo button to comment on the pin board of the accident report. This will appear on the printed image. Click the print out button to print. Click the ②...
Page 21 Configuration Click the Configuration button to open the Configuration window. *** . ** CD-2004MT 1. Speedometer Unit Selects the units for GPS speedometer (Km/h/MPH). 2. Recording Quality Sets the quality of recording. (High/Normal) Sets sensitivity of the 3G sensor [ 6 options: 1(insensitive) → 5(sensitive) / 0(off)] 3.
Page 22 Click Configuration button to open the Configuration Window. *** . ** CD-2004MT 10. Version Info. Displays software version and information. 11. Memory Check the path to the SD card 12. SD card Format Formats the connected SD card. 13. Default Setup Resets all settings to factory default.
Page 23: Specification
SPECIFICATION Video signal Input 4 Channel input (TVI or CVBS) Output HD 1 Output / CVBS 1 Output Audio signal 1 Input Recording Resolution 4Channels HD(1920x1080), CVBS(1920x1080) Frame 30fps Mode Normal / Event (G-sensor) / Manual Compression H.264 Memory SD Card (min.16GB ~ max.512GB) Power supply DC 12~24V (with super cap) max.32V Operating temperature...
Page 24 For further information please contact: support@trailervision.co.uk 01733 246473 User Manual...