Subscribe to Our Youtube Channel
Related Manuals for TimoLabs CORBETT I
Summary of Contents for TimoLabs CORBETT I
- Page 1 TimoLabs CORBETT I, Model# TM-BT003-2015A Rugged Waterproof Bluetooth Speaker Quick Start Guide...
-
Page 2: What's In The Box
WHAT’S IN THE BOX ? SPECIFICATION Product Dimension: Length x Width x Height 7.25” x 2.5” x 3.11” 184 x 63 x 79 mm Continuous Power Output: 10W Battery: 3.7V, 2000mAh Lithium-ion Battery 8 hours at 75% volume level Charging Time: ~ 3 hours Audio Source: Bluetooth... - Page 3 CONTROLS Press Power/Standby button to turn Corbett ON or OFF . When turned off, Corbett remains in standby Power mode. Please note that MAIN Pow- Standby er Switch on the back panel needs to be set on for Power/Standby but- ton to operate.
- Page 4 Song Track Select previous or next song track Selection accordingly. Toggle among Corbett operating Mode modes, Bluetooth, AUX input or Selection SD card. Indicator provides the status of the mode, such as Bluetooth pairing Power and mode. It also provides the pow- function er status of your Corbett.
- Page 5 MAIN POWER SWITCH AND CONNECTION Unlock the protective cover by turning the cap counter clockwise to reveal the switch and connec- tions. After using these functions, ensure that the cap is locked properly. Cor- bett is not waterproof without back cap locked.
- Page 6 Micro USB To charge your Corbett, connect the Charging USB cable provides to Micro USB 5V@1A Input 5V@1A. Corbett has a Main Power Switch Main and must be ON to power it. Only Power when Main Power Switch is ON, Switch the Power/Standby button is func- tional.
- Page 7 OPENING BACK CAP Step 1: Unlocking the Cap Turn the cap counter clock- wise as shown. The triangle tip on the Cap must indicate the open triangle on the back panel. Step 2: Opening the Cap Lift the Cap as shown.
- Page 8 LOCKING BACK CAP Step 1: Closing the Cap Cover the Back Panel Main Power Switch & Connec- tions with the Cap as shown. The Cap must fit snugly into the Back panel. Step 2: Closing the Cap Turn the cap clockwise as shown.
- Page 9 LED Flash Indicator will have red & blue flashing lights indicating Corbett is ready for pairing. - Turn on Bluetooth on your smart device. “TimoLabs Corbett I“will appear in device list. Select to pair. - Once paired, Corbett will produce a bell tone sound indicating a successful pairing.
-
Page 10: Care And Safety
CARE AND SAFETY Important Safety Instructions Please read following safety warnings carefully. TimoLabs is not liable for any cause of death, severe human injurey or property damage, if you did not read, comprehend and comply with safety warnings and instructions: 1. -
Page 11: Fcc Notice
CARE AND SAFETY FCC Notice This equipment has been tested and found to comply with the lim- its for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. - Page 12 CARE AND SAFETY Please read this guide Corbett Rugged Waterproof Bluetooth speaker is intended to be used both indoors and outdoors. The speaker has been tested to IPX7 waterproofing stan- dards. IPX7 standard allows Corbett to be submerged in water up to 1 metre water for 30 minutes without any damage.
- Page 13 Avoid prolonged exposure to ultraviolet radiation (UV) sunlight or magnetic fields. Check the rubber seal periodically for premature wear and clean Corbett I with a soft moist cloth and ensure no objects such as dirt, hair, sand are on the rubber seal ring. Do not use any oily solvent or chemicals for cleaning.
-
Page 14: Warranty
*stated below. The parts or products that are replaced become the prop- erty of TimoLabs. In the USA to obtain service under this limited warranty, contact support@timolabs.com for the name of the Authorized Service Center (ASC). - Page 15 WARRANTY TimoLabs is not responsible for damage to inbound product that was not properly packaged. TimoLabs will pay for the return shipment charges within the USA, but is NOT responsible for any costs shipping across international borders. If the unit is found not to be defective, the unit will be shipped back at the owner’s expense.
- Page 16 STRICT LIABILITY, OR OTHER THEORY, SHALL NOT EXCEED THE PRICE OF THE INDIVIDUAL UNIT WHOSE DEFECT OR DAMAGE IS THE BASIS OF THE CLAIM. IN NO EVENT SHALL TimoLabs BE LIABLE FOR ANY LOSS OF PROFITS, LOSS OF USE OR FACILITIES OR EQUIPMENT OR OTHER INDIRECT, INCIDENTAL, OR CON- SEQUENTIAL DAMAGE.
Need help?
Do you have a question about the CORBETT I and is the answer not in the manual?
Questions and answers