Philips FW-C10 Manual page 13

Hide thumbs Also See for FW-C10:
Table of Contents

Advertisement

All manuals and user guides at all-guides.com
13
DIM mode
You can select the desired brightness
for the display.
• Press DIM to select DIM 1, DIM 2,
DIM 3 or DIM OFF display mode.
™ The
display lights up.
DIM
™ "DIM 1", "DIM 2", "DIM 3" or
"DIM OFF" will be displayed
depending on the mode selected.
DIM OFF - normal brightness with
Spectrum Analyzer On
DIM 1 - normal brightness with
Spectrum Analyzer Off
DIM 2 - half brightness with
Spectrum Analyzer On
pg 01-28/C1-C10/37-En
13
OPERATING THE SYSTEM
DIM 3 - half brightness with
DIGITAL SOUND CONTROL
Spectrum Analyzer Off and all LEDs
(DSC)
on the system will be switched off.
The DSC feature enables you to enjoy
special sound effects that have preset
equalizer settings, providing the best
music reproduction.
• Press DSC to select OPTIMAL,
JAZZ, ROCK or TECHNO.
™ The Digital Sound Control display
Sound Control
™ "OPTIMAL, JAZZ, ROCK or
VOLUME ADJUSTMENT
Press MASTER VOLUME 3 or 4 to
increase or decrease the sound level.
Note:
For Personal Listening
– When "OPTIMAL" sound is selected
Connect the headphones plug to the
DBB will be switched on automatically.
n socket at the front of the system.
The speakers will be muted.
DYNAMIC BASS BOOST (DBB)
The DBB mode enhances the bass
response.
• Press DBB to switch on bass
response.
™ The DBB button lights up.
™ "DBB ON" and the DBB flag will
To switch off DBB
• Press DBB again.
™ The DBB button light is switched
™ "DBB OFF" will be displayed.
Note:
– Some CDs or tapes might be recorded
in high modulation, which causes a
distortion at high volume. If this occurs,
switch off DBB or reduce the volume.
MUTE (only on remote control)
This feature allows you to temporarily
switch off the sound of the system without
switching off the system when you require
panel will light up respectively.
a moment of silence.
TECHNO" and the respective flag
• Press MUTE on the remote control
will be displayed.
to switch off the sound.
™ "MUTE" and the MUTE flag will be
displayed.
• Press MUTE again on the remote
control or increase the MASTER
VOLUME to switch on the sound.
be displayed.
off.
16/11/1999, 1:56 PM
3139 116 19292 (ENG)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fw-c1

Table of Contents