SAFETY PRECAUTIONS When using any electrical appliance,basic safety precautions should always be followed,including the following: 1. Read all instructions and keep for future reference. 2. This appliance is not intended for use by persons(including children) with reduced physical,sensory or mental apabilities, or lack of experience and knowledge,unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Base Locking Screw an Head Assembly There are two knobs at the connector; the smaller one is the Tilt Knob and the big one is the Locking Knob. Unscrew the Locking Knob to loosen the Thread Bolt. Pull Telescopic inner up to your desired height and lock in place by tightening the Height Adjustment Screw .
5. Place the Control box on the holes of the Telescopic Inner ,then fix it with the Control Box Holder by Screw REMOTE CONTROL 1. Put two batteries (TypeAAA,1.5V) into the battery compartment of the remote control and close the cover until it clicks into place. The m aximum distance for transmitting signals from the remote control to the fan is 6 meters.