Big boss Healthy Boss 9510FENB Instructions Manual page 5

USAGE
HOW IT WORKS - BASICS
CAUTION: Never place your hands
near the blade. Never place your
hands or utensils into the Power
Base (without cup) when the
unit is plugged in.
2
1
Lower the Cup-Blade
Place the desired
ingredients into assembly into the Power
a cup. Place the Base. Line up the tabs
blade on by of the cup with
twisting it until the tabs of the
there is a tight seal. Power Base.
7
(Refer to p. 6 for Parts Identification)
PRESS DOWN
TO OPERATE
3
Press down on the cup to turn
the unit ON. The unit will remain
ON until you let go of the cup.
For coarse chopping, press on
the top of cup and quickly
release. Keep pressing and
releasing until you achieve
the desired consistency.
This method is perfect for
chunky salsa and coarsely
chopped onions.
USAGE
HOW IT WORKS - CONTINUOUS BLEND
TURN CUP ASSEMBLY
CLOCKWISE
FOR CONTINUOUS
PROCESSING
CAUTION: If the blade stops while in continuous blending mode,
immediately unplug the blender unit. This could happen if you are
chopping/grinding a hard ingredient. It could get stuck between the blade
and the side of the cup, preventing the blade from turning. To fix the
problem, ALWAYS UNPLUG THE UNIT FIRST. Then remove the cup with
blade and shake or tap the cup to unblock the blade. If that will not work,
twist off the blade from the cup and manually rotate the blade. Once the
obstruction is cleared and blade moves freely - assemble the blade and
the cup, and place into the Power Base. Try chopping again.
IMPORTANT: Always remember not to operate unit for more than
For continuous blending, turn
1 minute (60 sec) at a time as it can cause a permanent damage to
the cup clockwise until the tabs
the motor. If the motor does stop working and there is no obstruction,
of the cup fit under the lip of the
unplug the unit. Remove the cup with blade and let the unit cool
Power Base. This way the unit
down for a few hours before trying to use it again. The internal
will operate without you holding
mechanism shuts the unit off when it detects overheating.
the cup down.
Perfect for smooth consistency.
To turn the unit OFF, just twist
the cup counter clockwise
until the tabs of the cup and
the tabs of the power base
line up. Lift up the cup.
(Refer to p. 6 for Parts Identification)
8