Advertisement
Installation of TV-screen-bracket
1. This kit includes different screws with different lengths and diameters for an optimum mounting.
2. Put the TV-Screen on a soft surface and search the threaded holes on the back.
3. Determine the depth of the drilling by using a straw or toothpick.
4. If your TV-Screen has a concave back, use the spacer.
Tip: use the smallest possible spacer, to keep the distance screen - mounting support as small as
possible.
5. Insert the spacer between the screen and the mounting support.
6.
If a smaller screw (M4, M5 or M6) is used, please use a washer for every screw for improving the
stability.
Final installing
Fix the mounting support on the screen, by placing the holes of the mount support
over the threaded holes of the screen's backside.
Insert the suitable screws with washers in the holes and screw them in.
1. Screw in tightly with a cross-recess screwdriver..
Attention: The installing has to be carried out by at least two qualified people.
2. To complete the installing, hook both perpendicular brackets into the backside
of the screen, in both horizontal cross bars.
3. When hooking into, make sure that the safety screws of the mount are not
screwed in.
Use and adjustment
Other adjustment possibilities of your TV-mount bracket are the safety screw connection and the lock
mechanism.
1. Your new TV-wall mount bracket can be adapted according to your needs.
2. The inclination can be adjusted by loosening the tighten knobs. For swinging up the screen press
the right knob, pull down the screen support till the desired inclination is reached. Tighten again
the rotary knobs. To swing down the screen you have to press the right knob, pull up the screen
support, till the desired inclination is reached. The rotary knobs have to be tighten again.
3. You can screw tightly the TV-mount bracket on the cross bars with the safety screws. Additionally
tighten the screws against the cross bar at the bottom of the screen mount.
Important notice: The reprint or reproduction, even of excerpts, and any commercial use, even in part
of this instructions manual require the written permission of Wiltec Wildanger Technik GmbH.
© by WilTec Wildanger Technik GmbH
http://www.wiltec.info
WilTec Wildanger Technik GmbH
Königsbenden 12 / 28
D-52249 Eschweiler
Seite 4
Advertisement
