Lab-T X-COM2 User Manual

Hide thumbs

Table of Contents

Available languages

Quick Links

Download this manual

User Manual

Table of Contents

Need help?

Do you have a question about the X-COM2 and is the answer not in the manual?

Questions and answers

Summary of Contents for Lab-T X-COM2

Page 2 X-COM2 Manual Charging Red LED: Charging Blue LED: Fully charged...
Page 3 1. Press the Center Button for 12 seconds. 2. Press the (+) Button to enter into Phone Pairing 3. Search for Bluetooth devices on your mobile phone. Select the X-COM2 in the list of the devices detected on the mobile phone.
Page 4 Mobile Phone Call Making and Answering Answering a call: Tap the Center Button Ending a call: Press the Center Button for 2 seconds. Voice dial: Press the Center Button for 3 seconds. Speed dial: Press the (+) Button for 3 seconds. Rejecting a call: Press the Center Button for 2 seconds.
Page 5 3. Run the Sena Utility App. Swipe the screen to the right and tap Setting to configure the headset settings. Troubleshooting Factory Reset If you want to restore the X-COM2 to factory default settings, use the Factory Reset in the configuration menu. The headset automatically restores the default settings and turns off.
Page 6 Certification and Safety Approvals FCC Compliance Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Page 7 Certification et homologation de sécurité Déclaration de conformité FCC Cet appareil est en conformité avec la partie 15 des règles de la FCC. Son fonctionnement est soumis aux deux conditions suivantes : (1) Cet appareil ne doit pas créer d’interférences préjudiciables et (2) Cet appareil doit accepter toutes les interférences reçues, y compris celles qui pourraient entraver son bon fonctionnement.
Page 8 Énoncé d'Industrie Canada(IC) Le present appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisee aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioelectrique subi, meme si le brouillage est susceptible d’en compromettre le fonctionnement.