Safety Rules As with all machinery there are certain hazards involved with the operation and use. Using it with caution will considerably lessen the possibility of personal injury. However, if normal safety precautions are overlooked or ignored, personal injury to the operator may result. If you have any questions relative to the installation and operation, do not use the equipment until you have contacted your supplying distributor.
Table of contents Page number Safety Rules Limited warranty Specification sheet Noise emission Receiving your filtration system Parts of the filtration system Unpacking your filtration system Where to locate your filtration system Filtration system preparation Operating the Air filter. Air Filter Maintenance Exploded view drawings and parts lists...
Page 5
Limited Warranty New woodworking machines sold by Laguna Tools carry a one year warranty from the date of shipping. Laguna Tools guarantees all new machines sold to be free of manufacturers defective workmanship, parts and materials. We will repair or replace without charge, any parts determined by Laguna Tools, Inc. to be a manufacturer’s defect.
All damage must be noted on the delivery documents and signed by you and the delivery driver. You must then contact the seller [Laguna Tools] as soon as practical. If damage if found after delivery, contact the seller as soon as practical.
Unpacking your machine. 1. Dismantle the box and lift the box off the pallet [If fitted]. 2. Using the knife, cut the plastic wrap [if fitted]. 3. Remove all the parts that have been packed with the machine. Note. If you have any doubt about the described procedure, seek professional assistance.
Operating the Air filter. The air filter can be operated either by remote control or manually. If the selection switch is in the Off or On position, the remote control will not function. Manual Operation of the Filtration System Switch the On / Off / Remote control switch to the On position. Remote Operation of the Filtration System Switch the On / Off / Remote control switch on the air filter to the remote control position.
Page 9
long soft brush. If the filters are cleaned with a brush, extreme caution must be used as you could damage the filters, and have to replace them. Note. Never use any other method to clean the filters. If compressed air, water or a vacuum cleaner are used, there is a high probability that the specialized filter pores will be damaged and the filters will have to be replaced.
Need help?
Do you have a question about the Circulator 1400 and is the answer not in the manual?
Questions and answers