Advertisement
Step 2
Attach the knots to the left and right hooks of the frame as shown in Fig. 2a.
Step 3
Remove the fabric, aluminium alloy support rods and the top two pairs of short rods (shown
in Fig. 3a) and then assemble as per Fig. 3b.
Connect the two ends of the aluminium rod to the metal buckle hole on both sides of the
inner tent, as shown in Fig. 3d.
Attach the 4 pairs of loop-ended buckles as shown in Fig. 3e around the poles. The 4 corners
of the rectangular mesh at the top click onto the four buckles of the inner tent.
The hammock is now fully assembled.
Fig. 3a
Fig. 3d
Fig. 2a
Fig. 3b
Fig. 3e
Fig. 2b
Fig. 3c
Fig. 3f
Advertisement
