Counter Memory Function; S-Vhs Quasi Playback (Sqpb); Playing A Dvd Or Video Cd; Playback Setup - LG RC199M Owner's Manual

Counter Memory Function

This feature is useful if there is a section of tape you
want to view immediately after recording or if you
want to return to the same point several times.
1. Begin recording or playing a tape.
2. Press DISPLAY until the real-time counter is dis-
played on the TV screen.
3. At the point that you want to locate later, reset the
real-time counter to [0:00:00] by pressing CLEAR.
4. Continue to play or record.
5. Press STOP (x) when recording or playback
finishes.
6. Press RETURN (O). The tape automatically
stops when the tape counter returns to about
[0:00:00].

S-VHS Quasi Playback (SQPB)

• This Recorder can play back S-VHS recorded
tapes, however, it cannot make recordings using
S-VHS format tapes.
• SQPB is an abbreviation for S-VHS Quasi
Playback.
Playing a DVD or V
Playing a DVD or V

Playback Setup

1. Press OPEN/CLOSE (Z) to open the disc tray.
Load your chosen disc in the tray, with the play-
back side down.
2. Press OPEN/CLOSE (Z) to close the tray.
Playback starts automatically. If playback does
not start, press N (PLAY).
In some cases, the disc menu might appear
instead.
DVD
Use the b B v V buttons to select the title/chap-
ter you want to view, then press ENTER to start.
Press TITLE or LIST/DISC MENU to return to the
menu screen.
VCD
Use the number buttons to select the track you
want to view and press RETURN to return to the
menu screen. Menu settings and operating proce-
dures may differ. Follow the instructions on each
menu screen. You may also set PBC to [OFF]
(See page 26).
3. To stop the playback, press STOP x.
The unit records the stopped point, depending on
the disc. "Xx" appears on the screen briefly.
Press N (PLAY) to resume playback (from the
scene point). If you press STOP x again or
unload the disc ("x" appears on the screen.), the
unit will clear the stopped point.
Press OPEN/CLOSE (Z) to remove the disc.
Press OPEN/CLOSE (Z) to close disc tray or
press POWER (1), the disc tray closes automati-
cally and unit turns off.
Notes:
• If parental control is set and the disc is not within the
rating settings you must input the password.
(See [Rating] on page 23).
• DVDs may have a region code. Your Recorder will not
play discs that have a region code different from your
Recorder. The region code for this player is 1 (one).
• Unless stated otherwise, all operations described use
the Remote Control. Some features may also be avail-
able on the Setup menu.

Moving to another TITLE

RAM
When a disc has more than one title, you can move
to another title:
ideo CD
ideo CD
Press DISPLAY twice then use v / V to select the
title icon. Then, press the appropriate numbered
button (0-9) or b / B to select a title number.

Moving to another CHAPTER / TRACK

-RW
DVD
When a title on a disc has more than one chapter or
a disc has more than one track, you can move to
another chapter/track as follows:
• Press SKIP (> or .) briefly during playback
to select the next chapter/track or to return to the
beginning of the current chapter/track.
• Press SKIP (.) twice in quick successions to
step back to the previous chapter/track.
• To go directly to any chapter/track during
playback, press DISPLAY twice and use v / V to
select the chapter or track (for Video CD) icon.
Input the chapter/track number or use b / B.
N o t e :
On a Video CD with PBC, you must set PBC to [OFF] in the
Setup menu to use this function (See page 26).
-RW
+RW -R +R DVD
-RW RAM +RW
VR Video
VCD
-RW
VR Video
DivX
-R +R
29