Cleaning And Maintenance; Technical Specifications - Hyundai MC 24F Instruction Manual

III. INSTRUCTIONS FOR USE
Remove all the packaging material and take out the appliance. Remove any possible adhesion foils, stick-on
labels or paper from the appliance. Place the assembled appliance on a flat, steady, smooth and clean surface
at a height, out of the reach of children (see sec. I. SAFETY WARNING). Leave enough space to ensure
sufficient ventilation. Make sure that the power supply cord is not damaged and that it is not led underneath the
appliance or over any sharp or hot surfaces. Select mini fridge power supply type (12 V (DC) or 220-240 V (AC)
and use the relevant power cable. The space inside the mini refrigerator may be divided by means of a barrier
A11 (Fig. 1).
Attention
– If you intend to use the car fridge in a car, we recommend turning it off when turning off the engine.
Otherwise there is a risk of the car battery getting discharged when connected for a longer period of
time without the engine running.
– Do not switch directly from one operating mode into the other (WARM-COLD or COLD-WARM). This will
may cause inner body deformation. If you would like to change the operating mode, turn the appliance off.
Wait about 30 minutes before you switch it to the other operating mode.
COLD/OFF/WARM (A2) switch
„COLD" position - switch-over to the cooling function
„OFF" position - switch-off of the appliance
„WARM" position - switch-over to the heating mode
MAX/ECO (A3) switch
„MAX" position - switch-over to the maximum power mode
„ECO" position - switch-over to the ECO mode
Remarks:
– The lowest temperature, which may be achieved inside the mini refrigerator, depends on ambient
temperature and on the volume of food to be cooled. Food may be cooled to temperature up to 16 °C
lower than ambient temperature.
– Food may be heated and kept at temperature of about 60 °C in the heating mode.
– To ensure maximum effect, we recommend that you insert cooled/heated food into the refrigerator
depending on the used function (cooling/heating).
– The standby mode is primarily used to maintain the temperature. To ensure the best effect of cooling/
heating, use the maximum power.
IV. CLEANING AND MAINTENANCE
Clean the appliance with a damp cloth only. Make sure water does not get into the inner parts! Keep
the appliance clean. Do not use any coarse and aggressive cleaning agents (e.g. sharp objects,
scrapers, thinners or other solvents)! Do not wash the appliance under running water or in a dishwasher.
V. TECHNICAL SPECIFICATIONS
* Technical information can be found on the type plate inside the appliance (or on its back side) and on
the energy label.
* "Information Sheet" and "Directions for Use" can be downloaded at: www.hyundai-electronics.cz
* QR code on the energy label supplied with the appliance provides a web link to information
concerning the specification of this appliance in the EU EPREL database. Keep the energy label
together with user manual and all other documentation supplied with this appliance. The same
information in the EPREL database can also be found at: https: //eprel.ec.europa.eu
The model name (product number) can be found on the type plate of the appliance and also on the
energy label supplied with the appliance.
21 / 27
EN