Advertisement
Quick Links
WWW.HUNDREDFIT.COM
OWNER'S MANUAL （ 190S ）
CONTENTS
IMPORTANT INFORMATION SAFETY-----2-4
ASSEMBLY INSTRUCTIONS-----7-8
COMPLETE EXPLOSION DRAWING -----9
IMPORTANT INFORMATION SAFETY
PARTS LIST----10-11
1. Please keep this manual in a safe place for your reference when necessary.
1
Advertisement
Summary of Contents for 100FIT 190S
-
Page 1: Table Of Contents
WWW.HUNDREDFIT.COM OWNER’S MANUAL （ 190S ） CONTENTS IMPORTANT INFORMATION SAFETY-----2-4 EXPLODED-VIEW ASSMEBLY DRAWING-----5 ASSEMBLY TOOLS&NECESSARY PARTS -----6 ASSEMBLY INSTRUCTIONS-----7-8 COMPLETE EXPLOSION DRAWING -----9 IMPORTANT INFORMATION SAFETY PARTS LIST----10-11 1. Please keep this manual in a safe place for your reference when necessary. - Page 2 2. Please do not assembly or use this equipment until you read this manual thoroughly & carefully. The safety and efficiency only can be achieved when the equipment is assembled, maintained and used properly. It is your responsibility to ensure that all the users are informed of all the warnings and precautions.
- Page 3 the user is: 150kg. 8. The equipment is not suitable for therapeutic use. 9. Wearing proper clothing while using the equipment, Avoid wearing loose clothing that may get caught in the equipment or that may restrict or prevent movements. 10. Keep your back straight while exercising. 11.
-
Page 4: Exploded-View Assmebly Drawing
17. Press on the brake knob for emergency. Also, you can adjust the resistance by turning around the resistance adjusting & brake knob 18. Lock the equipment when stop using. MAINTENANCE 1. The safety level of the equipment only can be maintained if it is regularly examined for damage and or /wear and tear.(e.g. -
Page 5: Assembly Tools&Necessary Parts
ASSEMBLY TOOLS&NECESSARY PARTS... -
Page 6: Assembly Instructions
Nut (M8) Bolt Washer (Φ 8) Hex wrench Spanner ASSEMBLY INSTRUCTIONS... - Page 7 STEP 1 --Attach the front stabilizer (6) which is with transportation wheels to the main frame as shown and fix it tightly with washers， (42) and screw (45) by hex wrench. --Attach the rear stabilizer (7) to the main frame as shown and fix it tightly with bolts (43), washers (42) and cap nuts (17) by spanner.
-
Page 8: Complete Explosion Drawing
--Insert the handle bar post (4) into the tube as shown after Loosening and pulling out the Knob (22), and then select a desired height to align the hole, and then fix it tightly by the knob (22). --Fix the handlebar (5) onto the Handlebar post (4) tightly with washer（10）and knob(9) . -
Page 9: Parts List
PARTS LIST... - Page 10 NAME SPECIFICATION Main frame Saddle post Saddle sliding set Handlebar post Handlebar Front stabilizer 50*100*500 Rear stabilizer 50*100*500 Saddle knob M10*15L Washer ф25*ф10.5*5T brake knob Compression spring φ12.4*φ1.4*27L brake rod M10*P1.5*270L M10*P1.5*15*15*15L Cap nut brake handle Screw M6*12L HeadΦ12 Screw Φ8*M6*30L bushing knob L...
- Page 11 Adjusting pad φ58*M10*25L Screw M8*65,S=20 Screw M8*45L ,S=20 Transportation wheel φ69*27*φ8.5 Washer Φ8.5*Φ16*1.5T Nylon nuts Hexagon flange nut M12*P1.25 Washer ф35*ф12.5*2.0 sleeve φ20*φ12.2*24L Circle clip MEETф12 Pulley Flywheel shaft φ15*171*M12*P1.25 Bearing 6001 Flywheel sleeve φ20*φ12.2*57.5L Plastic part screw ST4.2*16 Out chain cover Inner chain cover screw ST4.2*16...