Advertisement
Setting up the TV set for the fi rst time
What is included
1
Fitting the stand
in the box
TV panel must be facing downwards.
1 x Operating Instructions
For the stand installation, there is
1 x Quick start guide
one type of screw provided as shown
1 x TV
below.
1 x RF cable
To complete the stand installation you
1 x Remote Control
will require a cross head screw driver.
2 x AAA Batteries
Place the TV set on a fl at and
1 x Mini composite / AV cable
clean surface with the panel facing
downwards to avoid damage.
1 x Mini component / YPbPr cable
1 x Stand installation pack
4 x
1 x Power cable
Used for attaching the stand
to the TV set (fi g.2)
2
Connecting your set
Outdoor Digital
TV Aerial
1.
2.
1) Connect the TV to your power socket.
2) If you wish to use the TV to receive Freeview/Saorview channels,
connect the RF input from the TV to your outdoor Digital TV aerial.
If you do not wish to receive Freeview/Saorview, skip this step.
4
First time installation
1
1. Languages
Select your preferred on screen display language. This will change the language in
which the menus and associated information is displayed in. When set up has been
completed, this can be changed by selecting Menu > Settings > Language
4
4. Environment of Use
Home Mode: For normal use, by default it is set to a power saving mode which re-
duces the energy used by up to 25% (by reducing the power to the LED/LCD panel).
This can be changed in the picture mode settings.
NOTE: In Home Mode, the TV will switch itself to the standby mode after 4 hours in
the event that the buttons on the remote control or TV set are not used.
Store Mode: For store display use. The picture is adjusted to optimum settings. The
store demonstration will appear on the screen automatically after two minutes.
Back/Shortest
R
Front/Longest
L
2
1
When the stand feet are installed correctly the
Place the TV set on a fl at and clean surface
stand feet will be longest at the front of the TV
with the panel facing downwards to avoid
and shortest at the back with the feet pointing
damage.
away from each other.
3 Powering On the TV
TV Control Stick
TV control stick
Switch on the television by pressing
the TV control stick located on the
TV set.
2
2. Country Selection
Select the correct fl ag for the country in which the set will be used in. This will enable
the set to correctly install the functions applicable in the country of use.
5
5. TV Installation – Audio.
Depending on how you use / install your TV, select the appropriate setting. The sound
settings on the TV will adjust to suit the type of installation.
1
2
4 x
3
When the stand/feet are in the correct
position, secure the feet to the underside of
the TV set using 4 screws provided.
Remote Control: Installing Batteries
Insert the batteries supplied into the remote
control and press the standby button to power
on the TV.
3
3. Network setup
You can connect the TV to your broadband router or wire-
less network in order to take advantage of the Smart functions. If you connect the
TV to your router using an Ethernet cable (recommended) this step will be skipped.
Follow the on screen prompts to connect to your wireless network. You can set up
the Network connection later in the network menu.
6
6. Default Source
Select the source which you use the most. If Digital TV (Freeview) is chosen, then at
the next step, the set will tune in and default to Digital TV (Freeview). If one of the
other sources is selected, then the set will not tune in at this stage and default to
that input. If it is required to tune the set in later, this can be achieved by selecting
Menu > Channels
3
4
Register your manufacturers
guarantee online within
guarantee online within
14 days of purchase at
14 days of purchase at
www.registertoday.co.uk/sharp
www.registertoday.co.uk/sharp
and enter into a prize draw to
and enter into a prize draw to
win a Sharp Soundbar
win a Sharp Soundbar
Terms and conditions apply. Online registration only.
Connectivity
ARC
ETHERNET
1
2
VGA/PC In
VGA/PC (Audio In)
A
C
D
E
B
A
ETHERNET*
Network connection
H
B
I
HDMI 1
HDMI input
J
C
HDMI 2
HDMI input (ARC)
D
K
VGA PC
VGA-PC input
L
E
VGA PC Audio In
3.5mm PC audio input
M
F
SCART
SCART Input
N
G
RF IN
RF / TV Aerial Input
O
* The Ethernet/LAN port is used for Freeview HD services and smart functions.
**The satellite input is for the LC-40FG5242K and LC-40FG5342K models only.
O
N
M
L
K
J
DIGITAL
AUDIO OUT
SCART
RF IN
SAT IN
OPTICAL
H
F
G
I
SAT IN**
Satellite input
Optical Digital Audio
Digital Audio output
HDMI 3
HDMI input
2 x USB
USB port
Earphones
Earphone input
AV IN
Audio/Video Input
YPbPr
HD input (YPbPr)
CI CARD IN
Common Interface module
Advertisement
