LG 47LS33A Owner's Manual page 23

If the USB HDD does not have an external
y
power source, the USB device may not be
detected. So be sure to connect the external
power source.
- Please use a power adaptor for an external
power source.
If your USB memory device has multiple
y
partitions, or if you use a USB multi-card
reader, you can use up to 4 partitions or USB
memory devices.
If a USB memory device is connected to a
y
USB multi-card reader, its volume data may
not be detected.
If the USB memory device does not work
y
properly, disconnect and reconnect it.
How fast a USB memory device is detected
y
differs from device to device.
If the USB is connected in Standby Mode,
y
that drive will automatically be loaded when
the display is turned on.
The recommended capacity is 1 TB or less
y
for a USB external hard disk and 32 GB or
less for USB memory.
Any device with more than the recommend-
y
ed capacity may not work properly.
If a USB external hard disk with a Energy
y
Saving function does not work, turn the
hard disk off and on again to make it work
properly.
USB storage devices below USB 2.0 are
y
supported as well. But they may not work
properly with videos.
A maximum of 999 folders or files can be
y
recognized under one folder.
It is recommended you use a certified USB
y
storage device and cable. Otherwise, a USB
storage device may not be detected or a
playback error may occur.
Only a USB memory device can be used
y
to play back the files distributed and stored
by SuperSign Manager. A USB hard disk or
multi-card reader will not work.
Only an FAT 32 file formatted storage device
y
can play back the files distributed and stored
by SuperSign manager.
A USB 3.0 storage device may not work.
y
23
ENTERTAINMENT