R :14%, G :12%, B :13%, a:100%
ERROR DECISION
ERROR
・ Thermistor has a bad
THERMISTOR
connection or failed
・ AC motor has a bad
AC, MOTOR
connection or failed
(CLUTCH
MOTOR)
・ Clutching is failed
-. Coupling get out of
-.Coupling is broken.
Automatic detection of
time to clean Tub
Tub
Clean
・
Occurs when motor
Coin
is
Stuc
Thermistor has a bad
・
connection or failed
THERMISTOR
BASIS
・ Check the connections at the
・ Test thermistor to determine
・ Check the connections at the
gear.
・ Test AC motor or coupling to
・
・
locked
・
・
・
CAUSE FOR ERROR
OCCURRENCE
Thermistor and at the WHITE
3-pin connector at the main
board
it is not detective
AC motor and at the WHITE
6-pin connector at the main
board
determine it is not detective
After Power On button
pressing, if
is blinking in
the display, it is the time for
Tub Cleaning.
Tub Clean time is detected
automatically as per the
usages of washer (Generally
once after 30 usages)
When foreign object such as
coin, pin, or clip entered the
washing plate
Check the connections at the
Thermistor and at the WHITE
3-pin connector at the main
board
Test thermistor to determine it is
not detective
44
REMEDY
・ Reseat the connector.
・ Replace the thermistor if
necessary.
・Reseat the connector.
・ Replace the AC motor if
necessary.
・ Replace the coupling or Clutch
housing if necessary.
Please empty the tub, insert
・
bleach into the detergent
dispenser and select the Tub
Clean cycle.
If you want to skip the Tub
・
Clean, press option buttons
to select desired cycle.
Once performed Tub Clean
・
cycle,
will disappear
until next point of time to
clean the tub.
・
Remove the coin or f oreign
object stuck between the
washer vane with pliers,
etc.
・
Reseat the connecto
Replace the thermistor if
・
necessar .
r.