CGS Mobile Command Center Quick Start Manual

Deploying your Mobile Command Center (MCC): While variations exist among the available configurations of the
MCC line, the same basic steps are used to deploy your unit. If variations are significant with your configuration,
you may also have an addendum included with this guide. Please retain all instructions with your kit to ensure
Open case. Swing open trays. Note the order in which
they unfold, as they will be folded back in reverse order
Contact Support at support@csgstore.net or 804.238.6111
Mobile Command Center
Quick Start Guide
proper deployment of your system.
Ensure your case locks are in the vertical
'unlock' position, and flip open latches.
when packing kit away.
Connect antennas to router. Stick antennas connect
to WIFI ports, paddle antennas to LTE ports. Router
models vary, and antennas/ports may be color coded
to aid in placement or an included addendum may be
included with details on your specific router chosen.
Do not overtighten antennas.
Connect Power Brick (outlet & cable marked red). Turn on battery
by holding down power button next to charge indicator, and slide
AC switch next to outlets. LED will indicate red when on. Your router
will power on and begin to boot. Wait until router has connected to
LTE service (~3-7 min), then connect power to switch (outlet & cable
marked blue). Phones will begin to boot. If desired, the USB power
(outlet & cable marked white) can be connected for case lighting.
Continued on reverse...