Preset Installation Help File for B-CONTROL BCR2000
Instructions for BEHRINGER BCR2000 & NATIVE INSTRUMENTS
This document will give you a quick overview about the BEHRINGER BCR2000 'NI X-
PRESS' PRESET and how to install it.
Please consider this preset merely as a starting point and as inspiration for your own
imagination.
Installation:
1. Open and extract the ZIP file.
The following files are included:
• This INSTRUCTION text document (.pdf)
• SINGLE PRESET file (.syx)
2. How to get the B-CONTROL PRESET from your computer into your
hardware:
• Connect the B-CONTROL to your computer via USB or MIDI port
(Computer MIDI OUT to B-Control MIDI IN)
• Select the correct USB or stand alone operating mode on the
hardware (please refer to the manual for details)
• Open the B-CONTROL preset file of your choice with a MIDI dump
program like "MIDI-OX" or "Send-SX" on your computer
or use the B-CONTROL EDIT software editor, which is available free of
charge at our homepage
• Don't forget to select the correct MIDI ports in the dump software!
For further information please visit
KEYBOARDS
BEHRINGER BCR2000 NI X-Press
www.behringer.com
www.behringer.com
®
XPRESS
BEHRINGER Spezielle Studiotechnik GmbH