Table of Contents
Advertisement
General specifications
General
Power requirements
Power consumption
Dimensions (W x H x D)
Operating temperature
Operating humidity
Inputs
Digital audio in (OPTICAL IN)
Analog audio in (AUX IN)
Portable in (PORT. IN)
Microphone (MIC 1/2)
Tuner
FM Tuning Range
DAB+ Tuning Range
System
Frequency Response
Signal-to-noise ratio
Dynamic range
Bus Power Supply (USB)
Available Digital Input Audio
Sampling Frequency
Available Digital Input Audio format Dolby Audio, PCM
Amplifier (RMS Output power)
Total output
HIGH
LOW
y Design and specifications are subject to change without notice.
Refer to the main label on the unit.
Refer to the main label on the unit.
Networked standby : 0.5 W
(If all network ports are activated.)
Approx.
430.0 mm x 1,054.0 mm x 400.0 mm
5 °C to 35 °C
5% to 60% RH
3.3 V (p-p), Optical jack x 1
2.0 Vrms (1 kHz, 0 dB), 600 Ω, RCA jack (L, R) x 1
1.0 Vrms (3.5 mm stereo jack) x 1
Sensitivity 20 mV (1 kHz), 6.3 mm jack x 2
87.5 to 108.0 MHz or 87.50 to 108.00 MHz
174.92 to 239.20 MHz
40 to 20,000 Hz
More than 75 dB
More than 80 dB
5 V 0 500 mA
32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
1,800 W RMS
450 W RMS × 2 (6 Ω at 1kHz, 15% THD)
900 W RMS (12 Ω at 200Hz, 15% THD)
Appendix
47
5
Advertisement
Table of Contents
