Using The Computer - LG L1754SK User Manual

Connecting the Display

Using the Computer

1.
Make sure to turn off the computer and product. Connect the cable as below sketch map
form 1 to
A
Connect Audio Cable
B
Connect Dsub Cable (PC)
C
Connect Dsub Cable (Mac)
Power Cord
2.
Insert the Cable Deco Cover in the Stand Body in the correct direction.
3.
Press button on the front switch panel to turn the power on.
When monitor power is turned on, the 'Self Image Setting
Function' is executed automatically.
(Only Analog Mode)
NOTE
' Self Image Setting Function'? This function provides the user with optimal display settings.When the user connects the monitor for
the first time, this function automatically adjusts the display to optimal settings for individual input signals.
'AUTO/SET' Function? When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted screen while using
the device or after changing screen resolution, press the AUTO/SET function button to improve resolution.
2 .
Analog signal Audio signal
Wall-outlet type
PC-outlet type
(Connects to the *LINE OUT jack of the PC sound card.)
Mac adapter
For Apple Macintosh use, a separate plug adapter is needed to
change the 15 pin high density (3 row) D-sub VGA connector on
the supplied cable to a 15 pin 2 row connector.
A6
Headphone/Earphone Input
Automatically mutes the speaker
volume when the headphones are
plugged in.
Fix the power cord & signal cable
as shown in the picture.