Table of Contents
Advertisement
Appliance settings
en
2
Appliance settings
C hildproof lock
A p p l i a n c e s e t t i n g s
Activating the childproof lock prevents
the settings from being accidentally
changed on the control panel.
Activating/deactivating the childproof
lock:
Press and hold Child lock 3 sec.
■
for 3 seconds.
The childproof lock will remain
Note:
active, even once the appliance has
been switched off. If you wish to change
settings on the control panel when you
turn on the appliance, you will need to
deactivate the childproof lock.
Activating setting mode
In order to apply the settings described
below, you will first need to activate
setting mode. The options on the
programme selector that will allow you
to do this are as follows:
1
Activate setting mode
2
Activate setting mode and adjust
audible notification signal
volume
3
Adjust the audible button signal
volume
4
Automatic switch-off function
18
Switch on the appliance.
1.
Turn the programme selector to
2.
position 1.
Press Adjust level Ù and, at the
3.
same time, turn the programme
selector to position 2.
Release Adjust level Ù.
4.
Setting mode is now activated.
Changing the audible signal volume
You can adjust the volume of audible
notification signals (that indicate that a
programme has ended, for example)
and audible button signals by turning
the rotary selector to the following
positions:
2: Audible notification signal volume
■
3: Audible button signal volume
■
Activate setting mode.
1.
Turn the programme selector to the
2.
required position.
Use the Finish In + or – button to
3.
set the volume you require (0 = off; 4
= very loud).
Advertisement
Table of Contents
