Galanz GL1SS24TBD User Manual

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

Thank you for purchasing a Galanz product. Please read this manual carefully for correct usage and safety,

and keep for future reference. For service, support and warranty information, call 800-562-0738.

Model# GL1SS24TBD GL1SS30TBD

Gas Cooktop User's Manual

@2019 Galanz Americas Limited Company.

nce,

using

rom

ted

ore

n it is

e for

cturing

ng.

moke

Table of Contents

Need help?

Do you have a question about the GL1SS24TBD and is the answer not in the manual?

Questions and answers

Summary of Contents for Galanz GL1SS24TBD

Page 1 Thank you for purchasing a Galanz product. Please read this manual carefully for correct usage and safety, and keep for future reference. For service, support and warranty information, call 800-562-0738. ©2019 Galanz Americas Limited Company @2019 Galanz Americas Limited Company.
Page 2: Table Of Contents
Thank you for purchas ing a G alanz produc t. P leas e read this manual c arefully for c orrec t us age and s afety, ©2019 Galanz Americas Limited Company and keep for future referenc e. For s ervic e, s upport and warranty information, c all 800- 562- 0738.
Page 3: Installation
Thank you for purchas ing a G alanz produc t. P leas e read this manual c arefully for c orrec t us age and s afety, this range hood. Spinal or other bodily injuries could occur if it is not. ©2019 Galanz Americas Limited Company and keep for future referenc e. For s ervic e, s upport and warranty information, c all 800- 562- 0738.
Page 4 INSTALLATION TO REDUCE THE RISK OF A STOVE TOP GREASE FIRE: Ducted fans MUST always be vented to the outdoors. DO NOT vent exhaust into spaces between walls, crawl spaces, Clean grease laden surfaces frequently. ceiling, attics or garages. Clean ventilating fan frequently. Any old duct work should be cleaned or replaced if necessary to Keep all surfaces clean from grease or oil build up.
Page 5: Specifications
Thank you for purchasing a Galanz product. Please read this manual carefully for correct usage and safety, ©2019 Galanz Americas Limited Company and keep for future reference. For service, support and warranty information, call 800-562-0738.
Page 6: Parts Supplied
Powered Drill Screwdrivers Thank you for purchas ing a G alanz produc t. P leas e read this manual c arefully for c orrec t us age and s afety, ©2019 Galanz Americas Limited Company Qty: 9 PCS Range Hood Hook...
Page 7: Venting Requirements
For best results, attempt to make a minimum of24" (61 cm) of and keep for future referenc e. For s ervic e, s upport and warranty information, c all 800- 562- 0738. straight vent between the elbows ifmore than one elbow is used. ©2019 Galanz Americas Limited Company...
Page 8: Venting Methods
INSTALLATION VENTING REQUIREMENTS VENTING METHODS This range hood is factory set for venting through the roof or wall. Vent work can terminate either through the roof or wall. To vent through a wall, a 90° elbow is needed. IMPORTANT NEVER exhaust air or terminate duct work into spaces between walls, crawl spaces, ceiling, attics orgarages.
Page 9: Height Clearances & Duct Size Calculator
For s ervic e, s upport and warranty information, c all 800- 562- 0738. ©2019 Galanz Americas Limited Company *Due to different ceiling height conﬁgurations, recommended height may...
Page 10 INSTALLATION Duct Deduction Calculation Example: Electrical Requirements (1)90o bend, (1) 31/，x 10” transition, (2) 45° bends,(1)sidewall cap with damper (with factory dampernot installed) IMPORTANT: Observe all governing ordinances and local codes. -9ft + -7ft + -5ft + -5ft + -1ft = -27ft (Please consult with a qualiﬁed electrician for any electrical wiring) Deduct 27 ft from 50 ft, giving you 23 ft of available straight It is the customer’s responsibility:...
Page 11: Preparation
INSTALLATION Copies of the standards listed may be obtained from: Preparation *National Fire Protection Association Batterymarch Park Advanced Preparations: Quincy, Massachusetts 02269 Familiarize yourself with the controls of the range hood by ** CSA International readingthrough Range Hood Operations, Page 15. 8501 East Pleasant Valley Road Place the range hood on a ﬂat, stable surface.
Page 12 INSTALLATION Set aside the bafﬂe ﬁlters and grease cup until the range hood is Preparations: properly installed. NOTE: To avoid damage to your hoods prevent debris If the range hood comes with a glass canopy and has not already from entering the vent opening. been mounted to the hood, loosen the fourcanopy screws and Determine and mark the center line on the wall where the range washers from the hood top, carefully place the canopy on the hood...
Page 13: Installation Overview
INSTALLATION Thank you for purchas ing a G alanz produc t. P leas e read this manual c arefully for c orrec t us age and s afety, and keep for future referenc e. For s ervic e, s upport and warranty information, c all 800- 562- 0738.
Page 14: Installation
INSTALLATION Install the mounting bracket Installation Double check your bracket is level, then mount thebracket on the wall using the predrilled holes in theprevious step. Utilize all provided hardware as it isdesigned as a system for a safe Confirm where you want your range hood installed Conﬁrm your centerline and side measurements of each piece installation.
Page 15 INSTALLATION Thank you for purchas ing a G alanz produc t. P leas e read this manual c arefully for c orrec t us age and s afety, and keep for future referenc e. For s ervic e, s upport and warranty information, c all 800- 562- 0738.
Page 16 INSTALLATION Secure the mounting bracket Predrill all mounting holes marked in the prior step.Install the mounting bracket using the providedhardware. Wait to mount the chimney and extensionuntil after step 9. Install ducting, connect power and test Install the duct tubing onto the household ducting ﬁrstand then allow the duct to extend downward.
Page 17 WARRANTY REGISTRATION INSTALLATION Install the filters To install the ﬁlters, postion the ﬁlters in the correct direction with the latch facing down and angle the rear section (end without the latch) into position, hooking the hanging tabs of the ﬁlter into the correct spaces of the hood. Continue to push and pivot the ﬁlter upward, while depressing the latch until it ﬁts into place.
Page 18 INSTALLATION Figure 6...
Page 19: Use And Care
USE AND CARE Range Hood Operations Increase Value Button Decreasing the suction and turning OFF the ventilation This button is used to turn ON the ventilation fan and also increase the suction of the ventilation fan. Press the Decrease Value Button to decrease the ventilation fan IDecrease Value Button speed.
Page 20: Troubleshooting
USE AND CARE Troubleshooting Adjusting the Delayed Power-Off System From the ON position (ventilation system), press and hold for 2-seconds the Delayed Power-Off Button to modify the Delayed If the range hood or light does not operate after Power-Off System installation: Use the Increase Value Button and Decrease Value Button to adjust the Delayed Power-Off System...
Page 21 WARRANTY REGISTRATION USE AND CARE Operations: The hood is not venting out properly: Read and understand all instructions and warnings in this Make sure the distance between the stove top and the bottomof manual before operating the appliance. Save these instructions the hood is within 26”...
Page 22: Electric Schematic
USE AND CARE Electric Schematic Touch Switch PCB...
Page 23 WARRANTY REGISTRATION MAINTENANCE Manintenance DO NOT allow salt solutions, disinfectants, bleaches, or cleaning compounds to remain in contact with stainless steel for extended periods. Many compounds contain chemicals, SAFETY WARNING: Never put your hand into area which may be damaging. Rinse with water after exposure and housing the fan while the fan is operating! wipe dry with a clean cloth.
Page 24: Maintenance
MAINTENANCE Replacing LED Light Fixture: WARNING This range hood uses LED light ﬁxture: 1.5W Max 12V LED Make sure the range hood is unplugged or turn OFF breaker Hazard of Burns! and the lights are cool to touch. Place a ﬂat-head screwdriver between light housing and hood Light bulb become extremely hot when turned on.
Page 25: Coverage & Exceptions
WARRANTY REGISTRATION WARRANTY Warranty What is Not Covered: Consumable parts such as light bulbs, metal and charcoal ﬁlters. The natural wear of ﬁnish, and wear due to improper mainte- One Year Parts Warranty: nance, use of corrosive and abrasive cleaning products, pads, For one year from the date of original purchase, your local reseller will and oven cleaner products.
Page 26: Disclaimer
WARRANTY Disclaimer Be sure to inspect the hood for damage and defects, and also function test the hood before installation. Appearance ﬂaws of the hood found after installation and not affecting hood performance is Carefully inspect all items for damages before accepting delivery. not covered under our warranty for returns or exchanges.

This manual is also suitable for:

Gl1ss30tbd