Quick Installation - ViewSonic VA2259 User Manual

Quick Installation

1. Connect video cable
• Make sure both the LCD display and computer are turned OFF.
• Remove rear panel covers if necessary.
• Connect the video cable from the LCD display to the computer.
Macintosh users: Models older than G3 require a Macintosh adapter. Attach the
adapter to the computer and plug the video cable into the adapter.
To order a ViewSonic
2. Connect power cord (and AC/DC adapter if required)
VA2259
Power Cord
VA2259-sh
Power Cord
VA2259-smh
Power Cord
Audio out
3. Turn ON LCD display and computer
Turn ON the LCD display, then turn ON the computer. This sequence (LCD
display before computer) is important.
NOTE: Windows users may receive a message asking them to install the INF file.
To access the file, please use the directory ":\CD\vsfiles".
Macintosh adapter, contact ViewSonic Customer Support.
®
4
DVI
D-Sub
HDMI
D-Sub
Audio out
HDMI
D-Sub
Audio in