Advertisement
C O M F O R T
TP-W150W
VIVE Comfort
P.O. Box 3377
Spring eld, MO 65804
Toll-Free: 1-800-776-1635 Web: www.vivecomfort.com
Hours of Operation: M-F 9AM - 6PM Eastern
Applications Guide
Applications Guide
The wireless repeater extends the signal range
of many of our wireless products. When
the TP-W150W receives a coded wireless
signal, it repeats it to extend the wireless range
of the device.
Table of Contents
Patents and Trademarks pending.
Copyright © 2013. All rights reserved.
TM
Page
2
3
4
5
6
INSTALLATION MANUAL
Power Type
Hardwire (Common Wire)
24V AC (18-30V)
RF Frequency
A trained, experienced technician
must install this product.
Carefully read these instructions. You
could damage this product or cause a
hazardous condition if you fail to follow
these instructions.
Una versión en español de este
manual se puede descargar en la
página web de la compañía.
1
Rev. 1340
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Vive Comfort TP-W150W
-
Page 1: Table Of Contents
The wireless repeater extends the signal range Hardwire (Common Wire) of many of our wireless products. When 24V AC (18-30V) the TP-W150W receives a coded wireless signal, it repeats it to extend the wireless range of the device. Table of Contents... -
Page 2: Wireless Modules Quick Reference
Antenna symbol indicates repeating indicates received signal. signal. Communication Note When the TP-W150W receives a coded wireless signal the “ ” Symbol will ash 3 times. Immediately following, the coded wireless ” Symbol and signal is repeated as the “... -
Page 3: Installation Tips
Wireless Module - Installation Wireless Range Range between the TP-W150W module and the devices to be repeated is up to 100 feet with no obstructions and up to 50 feet in standard residential construction. The TP-W150W module should be installed between the wireless devices. To extend the range try placing the modules closer together and/or further away from large metal objects. -
Page 4: Subbase Installation
Class II circuits per the NEC Code. or equipment damage. Wiring Module to Power Supply Wiring Note: The TP-W150W must be hardwired (C and R terminals Turn o power while wiring. connected to 24VAC power). W150W Power Supply... -
Page 5: Mounting & Battery Installation
MOUNT THE WIRELESS MODULES Mount the Wireless Modules Note: Align the 4 tabs on the subbase with corresponding The wireless modules can be wired slots on the back of the wireless modules. Then from the back or the bottom. push gently until the wireless repeater snaps in place. Installation Tip Do not install the wireless module in locations: •... -
Page 6: Speci Cations
Complete the form below and mail it to the address shown. Warranty Registration: Name: Thermostat Model: ____________________________ _____________________ Address: ____________________________ Date Installed: _____________________ ____________________________ Complete form and mail to: City: ____________________________ Thermostat Warranty Registration VIVE Comfort State: ____________________________ P.O. Box 3377 Zip: _____________________ Spring eld, MO 65804...
Need help?
Do you have a question about the TP-W150W and is the answer not in the manual?
Questions and answers