8.
PAPER REEL CARRIER PINCH ROLLER SPRINGS
A spring is fitted at each end of the paper reel carrier to force the
pinch roller into contact with the paper.
i d e n t i c a l , they must be fitted in the correct manner (see Figure 5) -
always remove and i n s t a l l one spring at a time.
fitted with springs made from 0.55 mm diameter wire; later printers
are fitted with springs made from 0.60 mm diameter wire.
these springs are to be c h a n g e d , the thicker springs should be fitted,
regardless of whether the printer is an early or later version.
A l t h o u g h the springs are
Early printers are
Whenever