Advertisement
INSTALLATION
•
Select a stable, dry and secure location for the safe.
•
If bolting to a wall, ensure that your safe is resting on a well-supported surface
(such as the floor or a shelf). Do not bolt your safe to both the floor and wall.
•
Place the safe in the selected location. Use a pencil to mark the mounting holes on
the floor or wall.
•
Move the safe and drill the holes 50mm deep using the appropriately sized drill bit.
Note: If you have any doubt regarding the installation or appropriate hardware for
your application, contact a qualified trades person for advice before drilling.
•
Move the safe back into position and align the mounting holes to the openings in
the safe.
•
If you are mounting into concrete, insert the included expansion anchors into the
holes before securing the safe in place using the suppled bolts.
•
Tighten the bolts securely.
WARNING:
Always use the expansion anchor when mounting to a
concrete surface.
C
Bolt
A
Expansion anchor
B
Advertisement
