Table of Contents
Advertisement
Connecting the
System
Attaching the rear speakers to
the wireless receiver
Connect the rear speakers to the wireless receiver
with the speaker cables.
Make sure the wire marked black goes in to the
terminal marked "–" (minus) and the other wire
goes in to the terminal marked "+" (plus).
(+)
Connecting the AC power cords
Connect the AC power cords to the AC connector
on the back of the wireless front left and right
speakers.
Connect the AC power cord to the AC connector
on the back of the wireless subwoofer.
Wireless connection
Connect the AC power cords of all the systems to a
wall outlet.
When you turn on the player, the wireless
connection will be completed automatically.
When the connection is completed, you can see
the icon ( ) on the display window.
LED indicator
(-)
LED Color
White (Blink)
White
Red
Off
(No display)
,
y Be sure to match the speaker, cable to the
appropriate terminal on the unit: + to + and
– to –. If the cables are reversed, the sound
will be distorted and will lack bass.
y If there is a strong electromagnetic wave
product nearby, interference may occur. Put
the unit (wireless receiver, wireless speakers,
wireless subwoofer, and main unit) away
from there.
y It takes a few seconds (and may take
longer) for the player with the built-
in wireless transmitter, wireless receiver,
wireless speakers, and wireless subwoofer to
communicate with each other.
y The available range is 20 m for wireless
connection in an open place.
Wireless connection, manually
You can set up wireless connection manually, when
your connection is not completed.
Refer to the "Connect wireless speakers" on page
35.
Connecting
Operation
The connection is not completed.
The connection is completed.
The connection is in standby
mode or failed.
The AC power cord is unplugged.
Note
19
2
Advertisement
Table of Contents
