Equinox Systems 7141-71SL Instruction Manual

Equinox Wireless
Charging Pad
nstruction Manual
7141-71SL
Features:
1. Wireless Charging Pad Surface
2. Micro-USB Input Port
3. LED Indicator
4. Non-Slip Pads
What's included:
1 x Wireless Charging Pad
1 x USB to Micro-USB Cable
1 x Instruction Manual
Tech Specifications
• Input power: 5V/1.5A
• Output power: 5W/1A
INSTRUCTIONS:
1. Charging Mobile Devices:
a. Ensure that your phone or tablet supports
wireless charging. It will be listed in the
manufacturer's specifications.
b. Connect the provided charging cable to a
power source and to the micro USB port
on the wireless charging pad (2). Once
connected the LED Indicator will turn RED.
c. Place the enabled device on the surface
of the wireless charging pad(1). The LED
will display RED/BLUE to indicate that the
phone is charging.
d. If the LED indicator is flashing BLUE and
RED an unknown object is being detected
between the wireless charging pad and the
phone by FOD(Foreign Object Detection).
The device will not begin to charge until
object is removed.
* Note: To charge devices, use only the
accessory cable or the cable included with
your own device by the manufacturer.
SAFETY PRECAUTIONS:
• WARNING-When using this product, basic
precautions should always be followed:
1. Read all the instructions before use.
2. Never store or use this product in
temperatures below 32°F (0°C) or above
115°F (45°C).
3. Do not overcharge your phone. The
unit may become hot under excessive
use. Remove your phone once it is fully
charged. Never charge your phone for
more than 7 hours at a time.
4. To reduce the risk of injury, close
supervision is required when the product is
used near children.
5. Do not expose the device to moisture.
6. Do not use the device in excess of its
output rating. Overload outputs above the
rating may result in a risk of fire or injury.
7. Do not use the device if damaged or
modified.
8. Damaged or modified batteries may exhibit
unpredictable behaviour resulting in fire,
explosion or risk of injury.
9. Do not disassemble the device. For repairs,
seek a qualified service professional.
Incorrect reassembly may result in a risk of
fire or injury.
10. Do not expose the device to fire or
excessive temperatures. Exposure to fire
or temperatures above 104°F (40°C) may
result in explosion.
11. To ensure product safety, ensure that
qualified service professionals use only
identical replacement parts.
12. Attachments on the back of your phone can
impede the effectiveness of the wireless
charger, and lead to overheating. Please
remove attachments from the phone before
charging on this device.
MADE IN CHINA