Download Print this page
Matco Tools PCFLOOD Quick Start Manual
Matco Tools PCFLOOD Quick Start Manual

Matco Tools PCFLOOD Quick Start Manual

Pro-charge wireless mini floodlight

Advertisement

Available languages

Available languages

Quick Links

WARNING
Study, understand and follow all instructions provided
with this product. Read these instructions carefully
before installing, operating, servicing or repairing this
tool. Keep these instructions in a safe, accessible place.
INTENDED USE OF THE TOOL
The PCFLOOD is designed to be used to illuminate dark
work areas, attached to ferrous (magnetic) surfaces. Do
not use this tool outside of the designed intent. Never
modify the tool for any other purpose or use.
WARNING
Caution: To help prevent personal injury
• Use of this product can expose you to chemicals such
as phthalates which are known to the State of
California to cause cancer, and birth defects or other
reproductive harm. For more information go to
www.P65Warnings.ca.gov/product.
Always wear ANSI approved safety equipment, safety
glasses and clothing when using this product. Study,
understand, and follow all instructions provided with
this product. Failure to read and follow all warnings
and operating instructions may result in damages and
serious injury or death.
• Always wear ANSI approved goggles when using this
product. (Users and bystanders).
• Never use this tool for any application other than for
which it was designed.
• Only use accessories designed for this tool.
• Never alter or modify this tool in any way.
• Improper operation and/or maintenance of the tool,
modification of the tool, or use of the tool with
accessories not designed for it could result in serious
injury or death.
• Always select the correct accessories of the correct
size and design for the job that you are attempting to
perform.
• Always work in a clean, safe, well-lit, organized and
adequately equipped area.
• Do not begin repairs without assurance that vehicle is
in a secure position, and will not move during repair.
BEFORE USE
When unpacking, check the parts diagram and part
number listing on page 2 to make sure all parts are
included. If any parts are missing or damaged, please
call your distributor.
PRO-CHARGE WIRELESS
MINI FLOODLIGHT
The manufacturer warrants this product to the original
user against defective material or workmanship for a
period of 1 year from the date of purchase.
The manufacturer reserves the right to determine
whether the part or parts failed because of defective
material, workmanship or other causes. Failures caused
by accident, alteration, or misuse are not covered by
this warranty.
The manufacturer, at its discretion, will repair or replace
product covered under this warranty, free of charge.
Repairs or replacements of products covered under this
warranty are warranted for the remainder of the original
warranty period.
The manufacturer or its authorized service representatives
must perform all warranty repairs. Any repair to the
product by unauthorized service representatives voids
this warranty. The rights under this warranty are limited
to the original user and may not be transferred to
subsequent owners.
The warranty is in lieu of all other warranties, expressed
or implied, including warranties of merchantability and
fitness for a particular purpose. Some states do not allow
the exclusion or limitations of incidental or consequential
damages, so the above limitations may not apply to you.
PRODUCT INFORMATION:
2-in-1 design. 720 lumens flood and 250 lumens
spot flashlight in one.
Lighting where you need it. 3¼ to 4½ hours run
time with charge level lights and magnetic
adjustable position base.
Wireless Charging. Matco Exclusive wireless
charging ready, or use any USB-C. (not included)
DO NOT DISCARD – GIVE TO USER
Page 1
1 YEAR LIMITED WARRANTY
PCFLOOD
Made in China
to Matco specifications
2103083-14

Advertisement

loading

Summary of Contents for Matco Tools PCFLOOD

  • Page 1 Keep these instructions in a safe, accessible place. INTENDED USE OF THE TOOL The PCFLOOD is designed to be used to illuminate dark work areas, attached to ferrous (magnetic) surfaces. Do not use this tool outside of the designed intent. Never modify the tool for any other purpose or use.
  • Page 2: Specification

    PRO-CHARGE WIRELESS PCFLOOD MINI FLOODLIGHT SPECIFICATION Light Type: Rechargeable COB + SMD Light Dimensions: 97 x 83 x 39mm Weight of Light: 0.48 lbs. (218g) Cordless/Corded: Cordless Charge Port Type, Micro USB: TYPE C On/Off, High/Low Switch Type: Low (Flood), Mid (Flood), High (Flood), Spot-Off...
  • Page 3: Información Del Producto

    Guarde estas instrucciones en un lugar seguro y accesible. EL USO DE LA HERRAMIETA El PCFLOOD está diseñado para iluminar áreas de trabajo oscuras, adheridas a superficies ferrosas (magnéticas). No utilice esta herramienta fuera de la Hecho en China intención de su diseño.
  • Page 4 PRO-CHARGE MINI LUZ DE INUNDACIÓN PCFLOOD LUMINICA INALÁMBRICA ESPECIFICACIÓN Tipo de luz: COB + SMD Recargable Dimensiones de luz: 97 x 83 x 39mm Peso de la luz: 0.48 llibras. (218g) Inalámbrico/Con cable: Inalámbrico Tipo de puerto de carga, Micro USB:...
  • Page 5: Informations Produit

    Conserver ces instructions dans un endroit sécuritaire et accessible. UTILISATION PRÉVUE DE L’OUTIL Le PCFLOOD est conçu pour être utilisé pour éclairer les zones de travail sombres, fixées sur des surfaces Fabriqué à Chine ferreuses (magnétiques).
  • Page 6: Spécification

    PRO-CHARGE MINI PCFLOOD PROJECTEUR SANS FIL SPÉCIFICATION Type de lumière: COB + SMD Rechargeable Dimensions de la lumière: 97 x 83 x 39mm Poids de la lumière: 0.48 lb (218g) Sans fil/filaire: Sans fil Type de port de charge, micro USB:...