Related Manuals for Selcom Security SEL SP-44
Summary of Contents for Selcom Security SEL SP-44
- Page 1 DEVICE FOR PROTECTION OF POWER LINES AND GROUND (Controlled noise generator through power lines and ground) SEL SP-44 USER MANUAL 2016 www.SELCOMSECURITY.com...
- Page 2 Current user manual (further in text –UM) contains description of operation and use of the device of active information protection through power lines and ground (controlled noise generator through mains) SEL SP-44 (further in text- device) according to purpose, is assigned for correct installation, configuration and exploitation.
- Page 3 150 kHz ÷ 10 MHz ................ 12 - 48 dB 10 MHz ÷ 30 MHz ................ 16 - 48 dB 30 MHz ÷ 400 Mhz ............... 10 - 47 dB 3) The operation time counter in generator mode. 4) Detection and protection against unauthorized access towards settings. 5) Remote ON/OFF through wired remote control.
- Page 4 3) During preparation for use, direct exposure to precipitation shall not be permitted; if the said exposure has occurred, the device shall be switched off and dried at room temperature for at least 4 hours. 4) During preparation for use it is necessary to conduct an external examination for traces of opening, mechanical damage and traces of liquids.
- Page 5 SP-44 LCD – indicator of controls and setup: Indicators – LED of operation channels - norm (green) - alert (red) On the backside of the device are situated: «RC» - connector for connecting the wired remote ON/OFF control. «220 VAC» - power supply switch 220 V / 50 Hz. Turning on the setup mode 1) switching On the setting mode is performed from the operating mode by pressing the "MENU/OK"...
- Page 6 "C" - cancel the installation and exit this setting A t t e n t i o n ! Switching on the operating mode by the "C" button is blocked when setting the permission to use the wired switch to turn on the operating mode. 4.
Need help?
Do you have a question about the SEL SP-44 and is the answer not in the manual?
Questions and answers