Advertisement
6. Slowly turn CH3 LEVEL clockwise until the CLIP LED indicator
begins to blink, then turn it down slightly. This indicates the maxi-
mum input voltage gain is matched and set properly.
7. Now turn up the master VOLUME to necessary level by rotating
clockwise.
To connect your iPod, iPad, iPhone, MP3 player, Android phone or
tablet or any other Bluetooth capable device follow the steps listed
below.
1. Make sure the unit's power switch is in the ON position.
2. Press the mode button until you are in Bluetooth mode.
3. Turn on the Bluetooth feature on your device and ensure that it is
"discoverable". Look for and select "NYC" from your devices list.
4. The device should connect to the N Series unit within 3-5 seconds.
The built-in media player allows you to play MP3 and WAV files. To
access this function follow the steps below.
1. Make sure the unit's power switch is in the ON position.
2. Insert a USB flash drive or SD card into the corresponding port.
Music should begin playing automatically.
3. Press the Mode button to scroll through files on USB flash drive or
SD card.
This unit comes equipped with an FM radio tuner. To operate the
tuner simply follow the steps below.
1. Make sure the unit's power switch is in the ON position.
2. Press the mode button until you are in FM mode.
3. Press the play button and the unit will search all active FM
stations. Once it is done searching, it will return to the first found
station.
4. To navigate the stations, use the Vol- / Vol+ buttons.
Advertisement
