Advertisement
Advertisement
Table of Contents
Summary of Contents for S Fire SF501P
- Page 1 USER MANUAL SF501P...
- Page 2 USER MANUAL Safety Instructions The use this product means that you fully understand and comply with the following warnings: 1- This device is for adults only, keep away from children and pets. Do not point the device directly at people, do not stay for a long time in the fully filled fog room. You may feel uncomfortable if you breathe in the mist.
- Page 3 USER MANUAL Technical Specfications Trigger Panic button / On and Off switch Connect the IN + and IN-, press the button at least 1 second (suggested 5 - 8 seconds), fog ejection. Switches to energy saver Activated by dry contact mode when the circuit closes.
- Page 4 USER MANUAL FUNCTION: signal. Activate the device to drive off intruders changing the signal. (60 SECOND DELAY PROTECTION after connecting the power). 1- Signal switch, panic button, ON / OFF switch. Connect the panic button: connect the device port IN+ and IN- to port NO and COM of the panic button separetely. 2- Other devices with switch signal output port.
- Page 5 USER MANUAL Equipment Test and Fog Canister Replacement 1- Unplug the power adapter, take out the fog canister and pull out the wire from the 2P terminal block, then connect the multimeter to the terminal. 2- Set the multimeter to DC12V, plug the power adapter, the display on your multimeter should show 0.
- Page 6 USER MANUAL PRECAUTIONS 1- The installation height is maximum of 3 meters for a good work of the generator. 2- Do not turn on the device until it the installation is completed. 3- Check the status of the device before replacing the fog cartridge. 4- Do not use the device near flammable or explosive materials.
Need help?
Do you have a question about the SF501P and is the answer not in the manual?
Questions and answers