Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Merlin 10M-E-GR
Summary of Contents for Merlin 10M-E-GR
-
Page 2: Table Of Contents
SAFETY COVER OWNER'S GUIDE TABLE OF CONTENTS I. Your Safety Cover: Construction SmartMesh Safety Covers Dura-Mesh Safety Covers Advanced Grade Mesh Safety Covers Solid Safety Covers II. Safety Cover Accessories: Window Mesh Drain Panels (Solid Safety Covers Only) Automatic Pool Pumps (Solid Safety Covers Only) Padding Step Riser Kits Raised Wall Kits... - Page 3 Construction: All Merlin Industries, Inc. safety covers are designed to formfit to the shape of the pool for which they are made. Rectangular safety covers should not be used on anything but rectangular pools and a safety cover must be used on the pool for which it was designed.
-
Page 4: Dura-Mesh Safety Covers
The SmartMesh safety cover meets or exceeds all standards for safety covers as established by the American Society for Testing Materials (ASTM)*. The SmartMesh safety cover comes with a limited pro-rated 15-year warranty, which warranties against manufacturer's defects. Refer to your warranty card. Dura-Mesh Safety Covers: The weave of the mesh safety cover is designed to allow water to drain through the cover and to prevent large debris and particles from passing through the safety cover and entering into the pool. -
Page 5: Step Riser Kits
Automatic Cover Pump for Solid Safety Covers: Solid safety covers can come with an automatic cover pump to remove water from the top of the cover in lieu of a window mesh drain panel. The pool pump should be placed at the lowest point of the cover or where the water accumulates. -
Page 6: Using Your Cover
III. USING YOUR COVER Merlin Industries, Inc. strongly suggests that a qualified pool professional complete the initial installation of the cover. Improper installation of the cover can result in the warranty being voided. Upon installation the cover should be taut across the pool. The springs on a mesh safety cover should be compressed approximately 50% and between 60% to 75% for solid safety covers and should not be removed without the aid of the installation tool. -
Page 7: Water Coming Through Seams (Solid Safety Covers)
Rough coping Smooth coping by removing any burrs or small pebbles. Pad coping with carpeting or some other non-abrasive substance. Padding is also available through your dealer from Merlin Industries, Inc. Windy area Adjust straps to tighten cover. Padding may also be needed (Available as an option, and can be added). -
Page 8: Closing Your Pool
IV. CLOSING YOUR POOL IN THE FALL The cover should be checked for any damage that may have occurred during storage. Never raise the deck anchors prior to reinstallation, as damage may occur by dragging the cover over raised anchors. Keep anchors flush until the cover is positioned correctly over the pool. -
Page 9: Opening Your Pool
VI. STORING YOUR COVER Before storing your Merlin cover, remove all leaves and debris from the cover's surface. Simply spray with hose and gently brush to loosen dirt. Check the cover prior to storage for excessive wear or damage that may have occurred during the winter. -
Page 10: Non Warranty Situations
ALL INQUIRIES REGARDING YOUR COVER SHOULD BE MADE TO YOUR DEALER OR INSTALLER. IF YOU ARE UNABLE TO CONTACT YOUR DEALER FOR ANY REASON, MERLIN INDUSTRIES CAN BE CONTACTED VIA EMAIL OR MAIL. MAIL TO : MERLIN INDUSTRIES, INC. - Page 12 The World's finest pool and spa products. www.merlinindustries.com...
Need help?
Do you have a question about the 10M-E-GR and is the answer not in the manual?
Questions and answers