Page 1
Quick Start Guide Quick Start Guide Ouvis V5 Smart Home HD Wireless Security Camera With Temperature and Humidity Sensor V 1.1 2017-06-15 1 / 10...
Quick Start Guide 1. About camera 1.1 Product List: IP camera*1 Bracket*1 Power adapter*1 Screws bag*1 Software disk*1 User manual*1 Temperature and Humidity Sensor * 1 Ethernet Cable * 1 1.2 Interface. Power Temperature and Reset Humidity Sensor Micro SD Card Slot 2 / 10...
Page 3
Quick Start Guide 2. Connect camera to your router 2.1 Plug the camera into the electric power outlet, and connect one end of the Ethernet cable in one of the LAN ports of the router, and the other end in the back of the camera. 3.
Page 4
Quick Start Guide Indicator light 4. View via smart phone 3.1 Download “CamHi” from Google Play Store / Apple App Store or scan the QR code below to get APP information. Android 3.2 Run APP and add the camera, make sure your phone is already connected to your WIFI then follow the steps below.
Page 5
Quick Start Guide Click on “Add Camera” Click the device ID you want to Click “Search camera from LAN” to search all online cameras in LAN 2. Click “Done” You should now see camera will 1. Input the show “Online” default password “admin”...
Quick Start Guide By swiping the The temperature screen and humidity directions, will show up here will be able to move the head of the camera. Click on the picture frame to the left of “Camera Online”, and you will be on full screen and watching live video.
Page 7
Quick Start Guide Click on Click here go to “Wi-Fi Setting” “Camera Setting” page From the network list, click on the same exact network that your smartphone connected to You must input the correct Wi-Fi password of your Wi-Fi network Camera will switch to WIFI connection mode automatically 7 / 10 when network cable unplug...
Page 8
Quick Start Guide 5. Micro SD Card Recording Settings 6.1 Alarm recording settings on smart phone. Open “Motion Detection” 2. Open the “alarm SD rec” 6.2 Set timer recording on phone. 8 / 10...
Page 9
Quick Start Guide Open here and set record timer Check the TF card is available 6.3 For more alarm recording settings, please visit our support website. 6. Reset and restore factory settings 7.1 Press and hold reset button for 5 seconds, then the camera will reset to factory defaults.
Page 10
IF YOU MEET ANY PROBLEM DURING INSTALLATION OR WANT TO USE THE CAMERA WITH PC, YOU CAN FIND RELATIVE TROUBLESHOOTING INSTRUCTIONS AND MANUALS ON SUPPORT.OUVIS.ONLINE , YOU CAN ALSO POST ONE CASE ON THE SUPPORT WEBSITE OR YOU CAN CONTACT US VIA SUPPORT EMAIL: SUPPORT@OUVIS.ONLINE...
Need help?
Do you have a question about the V5 Smart Home and is the answer not in the manual?
Questions and answers