Advertisement
STEP FOUR:
INSTALL SUPPORTS
LAST STEP!
TOP BUNK SUPPORTS
Lay the Top Bunk Support Boards into
position. Note the bed is widest in the center.
It is advised to insert each one in the center
then slide into position as the fit will be tight.
BOTTOM BUNK SUPPORTS
Evenly space the Bottom Bunk Support Slats
into position on the Bottom Bunk.
TOP RAILS
Slide the Safety Side Rails into their
appropriate bed holsters.
866-366-3505 M-F, 9-5
You are now ready to place a bunkie board
and mattress on the bottom bunk and a low
profile mattress (both sold separately) on the
top bunk. Then add the ladder!
Advertisement
