Related Manuals for Joape EcoJet Cyclone
Summary of Contents for Joape EcoJet Cyclone
- Page 2 EcoJet EcoJet EcoJet EcoJet EcoJet your equipment. If you have any ques ons, please contact SouthBee Customer Assistance by emailing admin@southbee.com or at 305-713-4424 during work hours, Monday to Friday from 9-5pm 14100 NW 60 Ave Miami Lakes, FL 33014 Phone: +1 305-713-4424 Email: admin@southbee.com...
- Page 3 EcoJet EcoJet Evapora ve systems demand the exchange of air, opera ng where there is air circula ng. WE RECOMMEND THE REPLACEMENT OF THE WHITE PLASTIC SPINNING DISC ON THE FRONT OF THE FAN EVERY TWO YEARS TO INSURE PERFORMANCE OF YOUR MISTING FAN...
- Page 4 EcoJet If the device gets rain and/or wet please wait un l it is completely dry to run again.
- Page 5 EcoJet EcoJet * The wall mount fans come with the bo om reservoir plug packed in a plas c bag. Please screw the plug into the threaded drain hole and ghten.
- Page 6 1 wheel that moves in all direc ons (and has a brake when you put the lever down to keep the Reservoir from moving). The installa on must be like this:...
- Page 7 Step 4: Unbox the water reservoir and place it over the base. Line up the holes in the base and reservoir. You will need the pieces from the plas c bag: Step 5: Remove the nut and washer from the bolt on the stopper. Insert the bolt into the hole in the base, put the washer and the screw nut on the bolt from the bo om.
- Page 8 Step 8: Plug the power cord to electricity, turn the fan on, and adjust the mist flow using the knob on the back or side. Always move the water tank carefully, pushing the tank in a way that prevents accidents. Ideally the tank should be moved when the reservoir fan is empty, as the water adds considerable weight NOTE: Make sure the drain plug on the back bo om of the reservoir is ght...
- Page 9 Step by Step – How to assemble the “shorty” water tank This “shorty” reservoir fan is shipped in 2 boxes: - 1 box with the fan - 1 box with the reservoir on wheels Step 1: Unpack the reservoir from its box as well as accessories that came with it (in case of any).
- Page 10 Step 6: Align the holes and insert the rear screws and front screws into the tank. Use the rear metal plate to connect both parts (one in the equipment and the other in the tank) so this can be used for adjus ng its angle in the future. Use these 4 screws for installation of the fan over the water tank.
- Page 11 & Cleaning EcoJet or side of the fan - clockwise to reduce mist, counter clockwise to increase mist. Unlike regular air-condi oning equipment, the EcoJet fan should not be used in closed rooms or areas. Excessive humidity can result. In air-condi oned environments, use the EcoJet system to increase the rela ve humidity of the air.
- Page 12 8 - Fan blades...
- Page 14 For reservoir fans, check if the water pump is connected to the water line. For the wall mount fans, check the bo om of the fan and verify the pump tubing connec on to the mist valve. Verify if there's no air inside the water tubing that is preven ng water to flow.
- Page 15 Revise power switch, electrical connec ons and loose wires and Motor(s) doesn't seem to work carefully make sure everything is ghtened Contact EcoJet customer service for a new disc WE RECOMMEND THE REPLACEMENT OF THE WHITE White plas c spinning disc is PLASTIC SPINNING DISC IN damaged FRONT OF THE EQUIPMENT...
- Page 16 EcoJet come EcoJet fans and pumps need to be rou nely cleaned per user manual instruc ons to work properly and not void the warranty. EcoJet EcoJet EcoJet EcoJet EcoJet EcoJet EcoJet Customer will contact distributor directly. EcoJet Retail Sales Returns 1.
Need help?
Do you have a question about the EcoJet Cyclone and is the answer not in the manual?
Questions and answers