Page 2
Thank you for purchasing the Riya drinks trolley Please read the instructions and warnings carefully before use, to ensure safe and satisfactory operation of this product. At John Lewis, we are committed to making great products possible. From our in-house Design Team, to our Buyers, we work together to bring great design to life.
Page 4
Your drinks trolley Description Dimensions Leg (left) 37cm X 20.5cm X 68cm Leg (right) 37cm X 20.5cm X 68cm Connecting bar Dia. 1.5cm X 32cm Shelf 69.6cm X 34.6cm X 1cm 03/05/2019...
Fixtures and fittings Description Dimensions Screw M4 x 8mm Allen bolt M6 X 8mm Washer Dia. 17 X 2mm Description Dimensions Open end spanner Allen key Wheel (with brake) 50mm Wheel (without brake) 50mm 03/05/2019...
Page 6
Product assembly Riya drinks trolley 862 48203 Step 1 Parts, fittings and tools ATTENTION! The metal surface can scratch. Take care during assembly Place the leg (2) on a soft surface as shown above near to where the drinks trolley will be used. Locate the connecting bars (3) as shown above.
Page 7
Product assembly Riya drinks trolley 862 48203 Step 3 Parts, fittings and tools Locate the leg (1) onto the connecting bars (3) as shown above. Step 4 Parts, fittings and tools Fix the connecting bars (3) to the leg (1) using the screw (A) and the screwdriver. 03/05/2019...
Page 8
Product assembly Riya drinks trolley 862 48203 Step 5 Parts, fittings and tools With 2 people carefully lay the trolley on its back on a soft surface. Support the glass (4) and align with the brackets located on the frame. Insert the allen bolts (B) with the allen key (E). Do not fully tighten at this stage until the trolley has been placed on its wheels to ensure the item is level.
Page 9
Product assembly To fit the wheel, rotate this collar clockwise Riya drinks trolley 862 48203 Step 7 Parts, fittings and tools Locate the wheels (G,F) onto the legs (1,2) as shown above. To fit, turn the collar clockwise as shown in the detail. Step 8 Parts, fittings and tools With 2 people carefully place the trolley onto its wheels.
Page 10
Product assembly Riya drinks trolley 862 48203 Step 9 Parts, fittings and tools Using the open end spanner (D) firmly tighten the wheel nuts as shown in the detail above. Should the trolley require a small amount of levelling remove the necessary wheel and install a washer (C). Refit the wheel and tighten securely.
Retain these instructions for future reference. Your feedback is very important to us and we would love to hear your comments on your new furniture. Please visit our website to leave a review. Thank you. John Lewis Partnership 171 Victoria Street London SW1E 5NN johnlewis.com...