Initial Use - Beko WTK72011W User Manual

Important
Fitting a different plug
Transportation of the product
1. Unplug the product before transporting it.
2. Remove water drain and water supply connections.
3. Drain all water that has remained in the product.
4. Install transportation safety bolts in the reverse order of removal procedure.
C
Never move the product without the transportation safety bolts properly fixed in place!
A
WARNING:
safe place away from reach of the children.

4.4.8 Initial use

C
Use an anti-limescale suitable for the washing machines.
Some water might have remained in the product due to the quality control processes in
production. It is not harmful for the product.
16 / EN
As the colours of the wires in the mains lead of this
appliance may not correspond with the coloured markings
identifying the terminals on your plug, proceed as follows:
1 Connect the green - yellow or green (earth) wire to the
terminal in the plug marked 'E' or with the symbol
coloured green and yellow or green.
2 Connect the blue (neutral) wire to the terminal in the
plug marked 'N' or coloured black.
3 Connect the brown (live) wire to the terminal in the plug
marked 'L' or coloured red.
With the alternative plugs a 13A fuse must be fitted either
in the plug or adaptor or in the main fuse box. If in doubt
contact a qualified electrician.
Packaging materials are dangerous to children. Keep packaging materials in a
Before starting to use the product make sure that the
preparations are made which are in line with the "Important
Safety and Environment Instructions" and the instructions in
the "Installation" section.
To prepare the product for washing laundry, first perform
a Drum Cleaning programme. If this is not available in your
machine, apply the method which is described in the section
4.7.2.
Washing Machine / User Manual
or