Table of Contents
Advertisement
Connect the supplied power adapter (), connect the power adapter via a power
cable to a free AC power outlet (). Connect the power adapter to the notebook at
the notebook power socket at the right side () of the notebook. Set the switch on
the power adapter (optional) to the I setting, in order to supply the notebook with
electricity and to charge the battery. (Set the switch to 0 to interrupt the electricity
supply.)
Open the display to the required position with your thumb and index fingers. To
avoid damage to the TFT Display, never open it more than 120º. Do not forcibly
open it.
Note
Please ensure that the battery is inserted and the power adapter connected
when operating the Notebook for the first time. If you fail to do this,
Windows® 7 will not be able to calculate the performance index correctly.
Switch the notebook on by operating the On/Off Switch (6). The notebook starts
and now goes through a number of phases.
Note
Make sure there is no bootable disc (e.g., the Recovery disc) in the optical
drive. Such discs will prevent the operating system from loading off the hard
drive.
Getting Started
(Diagram the same)
21
Advertisement
Table of Contents
