Table of Contents
Advertisement
The Remote Control
This wireless remote control set can only be used to control the Media Center
program on your notebook. In order for it to work, the following conditions must
be met:
The Notebook must be booted up.
®
Windows
must be fully loaded.
The driver software must be installed.
* All these conditions are met in the delivered state.
Inserting Batteries
1. Turn the remote unit round.
2. Open the battery compartment by pulling off the flap on the cover carefully.
3. Place one-button cell batteries (Type: CR2025, 3V) into the battery
compartment. Ensure that the polarity corresponds to the illustration etched
on the inside of the battery compartment (+ must correspond with + and –
with –).
4. Replace the cover on the battery compartment.
Attention!
There will be a danger of explosion if the battery is replaced
incorrectly. Only replace it with the same type or an equivalent type
of battery.
The TV Tuner & Remote Control (optional)
63
Advertisement
Table of Contents
