LG WFT11D82EP Owner's Manual page 29

C
onnecting Water Supply Hose
Screw Type
1
Attach the water supply hose to the tap.
Push the water supply hose up so that the rubber packing
within the hose can adhere completely to the tap.
2
Connect the water supply hose to the tap.
Connect the water supply hose to the tap and then tighten it
by screwing it to the right.
3
Check water leakage.
After connecting the hose, open the tap to check for any
water leakage.
Connecting Water Supply Hose to the machine
Connect the water supply hose to inlet valve of the washing
machine, and then lock it by turning the hose connecting
part.
Check to see if there is a rubber seal inside the connector.
Water
tap
Rubber Packing
Water Supply Hose
Hot
Cold
Hose connector
29
Rubber seal