Kelkay Easyfountain Rattan Weave 45040L Instructions

Easy Fountain Instructions
45040L Rattan Weave
Please read the assembly and pump operating instructions carefully and observe the safety instructions.
INSTALLATION OPTIONS
This garden water feature can be installed Above or Below ground
ABOVE GROUND INSTALLATION
Follow the assembly steps.
BELOW GROUND INSTALLATION STAGE 1
First, dig a hole large enough to cantain the reservoir. The top of the reservoir should sit level with the
ground when installed.
STAGE 2
Set the reservoir in the hold and check to ensure it is sitting level. Backfill around reservoir as needed.
STAGE 3
Follow the assembly steps, then cover the lid and surrounding area with river rock as desired for seamlesslook.
STAGE 4
The wicker surround should not be used for a below ground installation.
The transformer should never be submerged or stood in water.
Please note the transformer will get hot while in use, this is normal.
PUMP FLOW: The pump flow can
be adjusted with the regulator, this
is found on the inlet of the pump.
We recommend starting with the
flow regulator fully open and then
adjusting down if required.
www.kelkay.com
ELECTRICAL SAFETY: If outdoors the outlet must
be waterproof. We recommend the use of a residual
current device (GFI) Ground Fault Interrupter
(available from all good D.I.Y. stores) when
connecting the fountain to the electric supply.